A Friction-Stir Additive Machine for Orbital Fabrication of Large Aluminium Plates: Torque, Travel and Energy Budgets

This paper presents a computed design study, SIMULATED, NOT MEASURED, for large flat structural plates and tank wall sections too wide for powder beds in orbit, using aluminium 2219 plate feedstock and shoulder stock. The operating principle is distinct from neighbouring production methods: a rotating non-consumable tool plunges into stacked plate and traverses, plasticising and forging the metal in the solid state as it goes, so a large plate is built by stirring rather than melting. Peak temperatures remain below the melting point, porosity characteristic of fusion is absent, and the feedstock is ordinary plate, the cheapest form in which aluminium reaches orbit. The governing variables are spindle torque, rotation rate and travel speed. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 5.76 megajoules per kilogram of product, an installed electrical power of 15.4 kilowatts, a production rate of 9.6 kilograms per hour, and an annual throughput of 7.6e+04 kilograms over 330 operating days. Rejecting 8.45 kilowatts of waste heat at 330 kelvin requires 14.3 square metres of radiator, a photovoltaic supply requires 37.6 square metres of array, and the installed mass is 1.16e+03 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-13
DOI
https://doi.org/10.5281/zenodo.24185035
Citations
1
Primary Topic
Advanced Welding Techniques Analysis
Type
article
Field-Weighted Citation Impact
1.57
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A Friction-Stir Additive Machine for Orbital Fabrication of Large Aluminium Plates: Torque, Travel and Energy Budgets

William Alexander Aldred
1 citations
Zenodo (CERN European Organization for Nuclear Research)
Advanced Welding Techniques Analysis
1.57
article

A Friction-Stir Additive Machine for Orbital Fabrication of Large Aluminium Plates: Torque, Travel and Energy Budgets

William Alexander Aldred
article en
1 citations

Abstract

This paper presents a computed design study, SIMULATED, NOT MEASURED, for large flat structural plates and tank wall sections too wide for powder beds in orbit, using aluminium 2219 plate feedstock and shoulder stock. The operating principle is distinct from neighbouring production methods: a rotating non-consumable tool plunges into stacked plate and traverses, plasticising and forging the metal in the solid state as it goes, so a large plate is built by stirring rather than melting. Peak temperatures remain below the melting point, porosity characteristic of fusion is absent, and the feedstock is ordinary plate, the cheapest form in which aluminium reaches orbit. The governing variables are spindle torque, rotation rate and travel speed. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 5.76 megajoules per kilogram of product, an installed electrical power of 15.4 kilowatts, a production rate of 9.6 kilograms per hour, and an annual throughput of 7.6e+04 kilograms over 330 operating days. Rejecting 8.45 kilowatts of waste heat at 330 kelvin requires 14.3 square metres of radiator, a photovoltaic supply requires 37.6 square metres of array, and the installed mass is 1.16e+03 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement.

Zenodo (CERN European Organization for Nuclear Research)
Industry, innovation and infrastructure, Affordable and clean energy
Openalex Percentile: Top 25%
Advanced Welding Techniques Analysis
1.57
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon