Parametric Effects on the Deployment Dynamics and Passability of the Inner Assembly of a 216-Type Wireline Coring Tool in Ultra-Deep Wells

Wireline coring enables efficient core recovery in deep and ultra-deep wells. However, the deployment of slender inner assemblies through curved drill pipes is often affected by wall contact, friction, and localized stress, potentially leading to deployment arrest. This study investigates the deployment dynamics and passability of the inner assembly of a 216-type wireline coring tool. A nonlinear transient finite-element model was developed in ANSYS 2022 to characterize axial motion, bending deformation, repeated wall contact, and local stress within a prescribed S-shaped drill pipe. Drilling-fluid conditions were incorporated indirectly through Fluent-derived initial deployment velocities, while Hertz contact theory and mesh sensitivity analysis were employed to assess the physical plausibility and numerical consistency of the model. Parametric simulations examined the effects of annular clearance, core-barrel wall thickness, assembly length, and initial deployment velocity. The results show that deployment arrest occurs at annular clearances of 5.0, 5.5, and 6.0 mm, whereas successful deployment is achieved at 6.5 mm. At a clearance of 5.0 mm, the equivalent stress peak reaches 934.44 MPa, exceeding the material yield strength and indicating a potential risk of local yielding. Increasing wall thickness from 5 to 7 mm intensifies localized stresses, while extending assembly length from 10 to 20 m accelerates velocity attenuation. Nevertheless, successful deployment is achieved in all four cases. Within the investigated initial velocity range of 3.4–3.6 m/s, successful deployment is achieved in all cases, although transient contact responses vary. These findings provide insights into contact-induced deployment arrest and offer guidance for improving the structural design and deployment performance of wireline coring tools under the investigated conditions.

Authors

Institutions

Publication Details

Journal
Applied Sciences
Published
2026-11-13
DOI
https://doi.org/10.3390/app162211265
Primary Topic
Drilling and Well Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Parametric Effects on the Deployment Dynamics and Passability of the Inner Assembly of a 216-Type Wireline Coring Tool in Ultra-Deep Wells

Hengchun Zhang, Jian Liang, Zhitong Zhu, Longlong Cao
4 links
Applied Sciences
Drilling and Well Engineering
article

Parametric Effects on the Deployment Dynamics and Passability of the Inner Assembly of a 216-Type Wireline Coring Tool in Ultra-Deep Wells

Hengchun Zhang, Jian Liang, Zhitong Zhu, Longlong Cao
article en

Abstract

Wireline coring enables efficient core recovery in deep and ultra-deep wells. However, the deployment of slender inner assemblies through curved drill pipes is often affected by wall contact, friction, and localized stress, potentially leading to deployment arrest. This study investigates the deployment dynamics and passability of the inner assembly of a 216-type wireline coring tool. A nonlinear transient finite-element model was developed in ANSYS 2022 to characterize axial motion, bending deformation, repeated wall contact, and local stress within a prescribed S-shaped drill pipe. Drilling-fluid conditions were incorporated indirectly through Fluent-derived initial deployment velocities, while Hertz contact theory and mesh sensitivity analysis were employed to assess the physical plausibility and numerical consistency of the model. Parametric simulations examined the effects of annular clearance, core-barrel wall thickness, assembly length, and initial deployment velocity. The results show that deployment arrest occurs at annular clearances of 5.0, 5.5, and 6.0 mm, whereas successful deployment is achieved at 6.5 mm. At a clearance of 5.0 mm, the equivalent stress peak reaches 934.44 MPa, exceeding the material yield strength and indicating a potential risk of local yielding. Increasing wall thickness from 5 to 7 mm intensifies localized stresses, while extending assembly length from 10 to 20 m accelerates velocity attenuation. Nevertheless, successful deployment is achieved in all four cases. Within the investigated initial velocity range of 3.4–3.6 m/s, successful deployment is achieved in all cases, although transient contact responses vary. These findings provide insights into contact-induced deployment arrest and offer guidance for improving the structural design and deployment performance of wireline coring tools under the investigated conditions.

Applied SciencesVol. 16(22)
Ministry of Natural Resources (CN), Chinese Academy of Geological Sciences (CN), China University of Geosciences (Beijing) (CN)
Drilling and Well Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon