Design Optimization and Finite Element Analysis of Composite Materials for Aerospace Applications

Abstract Aircraft structural safety and service life are highly dependent on the mechanical properties of the composite materials; however, the degradation of composite due to fatigue, thermal cycling and environment exposure are not sufficiently predicted, especially after design life. This study is aimed at filling that gap, developing a validated, finite element framework for design optimization and service-life forecasting of aerospace composites. The goal is to model CFRP and E-glass/epoxy panels, determine critical failure locations, optimize laminate design, and use results from fatigue test to predict calendar-year life. Characterization of properties of two aerospace composites and modeling with SolidWorks and analysis in ANSYS Mechanical under tensile, compressive and thermal loads. Two types of optimizations, static and fatigue optimizations and multi-objective optimization, were performed using SHELL281 and INTER205 elements with Hashin damage criteria, TWIST load spectrum, Latin hypercube DOE planning scheme, TWIST response surface, NSGA-II optimizer. The results of coupon-level verification were within 6% of published moduli, and 4% of published strength. The highest von Mises stress was found to be 412 MPa at the window corner for CFRP and 198 MPa at the corner for fiberglass. The first buckling load factors were 2.14 (CFRP) and 1.68 (fiberglass) well above the minimum of 1.50. Peak interlaminar shear stress (ILSS) at the lap joint was 28.4 MPa and the allowable was 60 MPa for CFRP. Fatigue life is 92,000 cycles (≈ 25 years) for CFRP, as compared to 48,000 cycles (≈ 15 years) for fiberglass. Optimization resulted in 11.4% reduction (4.82–4.27 kg) in mass and 18% increase and 22% improvement in first ply failure margin and fatigue life, respectively. Forecast service lives were: CFRP, 25.6 years; fiberglass, 14.9 years, which is called for 5-year and 3-year inspection intervals respectively. The framework is the basis of a repeatable airframe design and condition-based maintenance.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-13
DOI
https://doi.org/10.21203/rs.3.rs-11497162/v1
Primary Topic
Mechanical Behavior of Composites
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Design Optimization and Finite Element Analysis of Composite Materials for Aerospace Applications

Juliana Vinagre Lisboa, Helal Uddin
1 links
Research Square
Mechanical Behavior of Composites
preprint

Design Optimization and Finite Element Analysis of Composite Materials for Aerospace Applications

Juliana Vinagre Lisboa, Helal Uddin
preprint en

Abstract

Abstract Aircraft structural safety and service life are highly dependent on the mechanical properties of the composite materials; however, the degradation of composite due to fatigue, thermal cycling and environment exposure are not sufficiently predicted, especially after design life. This study is aimed at filling that gap, developing a validated, finite element framework for design optimization and service-life forecasting of aerospace composites. The goal is to model CFRP and E-glass/epoxy panels, determine critical failure locations, optimize laminate design, and use results from fatigue test to predict calendar-year life. Characterization of properties of two aerospace composites and modeling with SolidWorks and analysis in ANSYS Mechanical under tensile, compressive and thermal loads. Two types of optimizations, static and fatigue optimizations and multi-objective optimization, were performed using SHELL281 and INTER205 elements with Hashin damage criteria, TWIST load spectrum, Latin hypercube DOE planning scheme, TWIST response surface, NSGA-II optimizer. The results of coupon-level verification were within 6% of published moduli, and 4% of published strength. The highest von Mises stress was found to be 412 MPa at the window corner for CFRP and 198 MPa at the corner for fiberglass. The first buckling load factors were 2.14 (CFRP) and 1.68 (fiberglass) well above the minimum of 1.50. Peak interlaminar shear stress (ILSS) at the lap joint was 28.4 MPa and the allowable was 60 MPa for CFRP. Fatigue life is 92,000 cycles (≈ 25 years) for CFRP, as compared to 48,000 cycles (≈ 15 years) for fiberglass. Optimization resulted in 11.4% reduction (4.82–4.27 kg) in mass and 18% increase and 22% improvement in first ply failure margin and fatigue life, respectively. Forecast service lives were: CFRP, 25.6 years; fiberglass, 14.9 years, which is called for 5-year and 3-year inspection intervals respectively. The framework is the basis of a repeatable airframe design and condition-based maintenance.

Research Square
Serviço Nacional de Aprendizagem Industrial (BR), Hajee Mohammad Danesh Science and Technology University (BD)
Mechanical Behavior of Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon