Prediction and Optimization of Material Removal Rate in Wire Electrical Discharge Machining of Ti-6Al-4V Using Taguchi Design and Machine Learning Approach

Ti-6Al-4V is widely employed for use in aerospace, biomedicine and marine engineering applications. Material removal rate (MRR) in Wire Electrical Discharge Machining (WEDM) is strongly dependent on the wire electrode and discharge settings but has been rarely studied using statistical and Machine Learning (ML) methods together. For this purpose, a Taguchi L27 orthogonal array design was used to study the influence of peak current, pulse-on time, pulse-off time and wire electrode (brass, zinc-coated brass, molybdenum) on the MRR. The very same 27 experimental data points were analyzed using the signal-to-noise ratio method and analysis of variance, as well as using five ML algorithms for regression (polynomial ridge regression, support vector regression, random forest, extreme gradient boosting and artificial neural network) assessed through leave-one-out cross-validation. Peak current, pulse-on time and wire electrode had the strongest influence, whereas pulse-off time was statistically insignificant. The support vector regression approach performed better with an R2 of 0.81 in cross-validation and root mean squared error of 0.31 mm3/min in predicting the MRR. Both optimization methods predicted identical optimal conditions (zinc-coated brass wire, pulse-on time of 111 µs, pulse-off time of 61 µs, and peak current of 220 A). The only exception was an insignificant pulse-off time. Since both analysis methods use the same non-replicated data set (n = 27), the agreement is just a consistency test, not a validation, and the results are valid only for the examined range.

Authors

Institutions

Publication Details

Journal
Journal of Manufacturing and Materials Processing
Published
2026-11-13
DOI
https://doi.org/10.3390/jmmp10110507
Primary Topic
Advanced Machining and Optimization Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Prediction and Optimization of Material Removal Rate in Wire Electrical Discharge Machining of Ti-6Al-4V Using Taguchi Design and Machine Learning Approach

Shailesh Shirguppikar, Pankaj Balasaheb Gavali, Aleksandar Ašonja, Vaibhav Sidraya Ganachari et al.
1 links
Journal of Manufacturing and Materials Processing
Advanced Machining and Optimization Techniques
article

Prediction and Optimization of Material Removal Rate in Wire Electrical Discharge Machining of Ti-6Al-4V Using Taguchi Design and Machine Learning Approach

Shailesh Shirguppikar, Pankaj Balasaheb Gavali, Aleksandar Ašonja, Vaibhav Sidraya Ganachari, Andreja Stefanović, Boban Spasić, Strahinja Djurović
article en

Abstract

Ti-6Al-4V is widely employed for use in aerospace, biomedicine and marine engineering applications. Material removal rate (MRR) in Wire Electrical Discharge Machining (WEDM) is strongly dependent on the wire electrode and discharge settings but has been rarely studied using statistical and Machine Learning (ML) methods together. For this purpose, a Taguchi L27 orthogonal array design was used to study the influence of peak current, pulse-on time, pulse-off time and wire electrode (brass, zinc-coated brass, molybdenum) on the MRR. The very same 27 experimental data points were analyzed using the signal-to-noise ratio method and analysis of variance, as well as using five ML algorithms for regression (polynomial ridge regression, support vector regression, random forest, extreme gradient boosting and artificial neural network) assessed through leave-one-out cross-validation. Peak current, pulse-on time and wire electrode had the strongest influence, whereas pulse-off time was statistically insignificant. The support vector regression approach performed better with an R2 of 0.81 in cross-validation and root mean squared error of 0.31 mm3/min in predicting the MRR. Both optimization methods predicted identical optimal conditions (zinc-coated brass wire, pulse-on time of 111 µs, pulse-off time of 61 µs, and peak current of 220 A). The only exception was an insignificant pulse-off time. Since both analysis methods use the same non-replicated data set (n = 27), the agreement is just a consistency test, not a validation, and the results are valid only for the examined range.

Journal of Manufacturing and Materials ProcessingVol. 10(11)
Shivaji University (IN), University of Novi Sad (RS), University of Priština - Kosovska Mitrovica (XK), Univerzitet Privredna akademija u Novom Sadu (RS), Akademija strukovnih studija Politehnika (RS), University of Prishtina (XK)
Advanced Machining and Optimization Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon