Effect of By-Product-Derived Low-Melting-Point Additive on Mineralogical and Metallurgical Properties of Iron Ore Sinter

Reducing solid fuel consumption in iron ore sintering is an important strategy for lowering fossil fuel use and associated CO2 emissions. However, insufficient heat input can limit liquid-phase formation and compromise sinter quality. In this study, a by-product-derived low-melting-point additive (LMA) was used under reduced-fuel sintering condition, and the resulting mineralogical characteristics, pore structural, and metallurgical properties were evaluated. Preformed Ca–Fe–O phases accounted for 46.2 wt.% of the quantified crystalline phase assemblage in the LMA. Differential scanning calorimetry revealed a thermal event near 1200 °C, interpreted as being associated with the onset of liquid-phase formation. In sinter pot tests, the LMA-containing reduced-fuel condition (RFL) exhibited a lower maximum bed temperature than the conventional reference condition (STD), decreasing from 1375 to 1339 °C. With the mean STD values normalized to 100%, the relative mean reducibility index, tumble index, and reduction disintegration index of RFL were 104.7%, 101.8%, and 100.3%, respectively, indicating that these quality indices remained broadly comparable despite the reduced fuel input. Rietveld refinement indicated a higher magnetite fraction and a lower SFCA-I fraction in RFL, suggesting that the higher mean reducibility could not be explained by bulk mineralogy alone. Optical microscopy of entire specimen cross-sections revealed a lower pore area fraction and a more consolidated structure in RFL, whereas mercury intrusion porosimetry indicated that mercury-accessible pore volume associated with pore-entry sized below 50 μm was largely maintained. Overall, these findings suggest that the combined use of LMA and reduced fuel input can maintain sinter quality at a lower maximum bed temperature. The pore-structure results provide a possible explanation for the higher mean reducibility despite the mineralogical changes, although a causal relationship has not been established.

Authors

Institutions

Publication Details

Journal
Minerals
Published
2026-11-13
DOI
https://doi.org/10.3390/min16111186
Primary Topic
Iron and Steelmaking Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of By-Product-Derived Low-Melting-Point Additive on Mineralogical and Metallurgical Properties of Iron Ore Sinter

Seung Seok Oh, Joonho Lee, Jonghyup Lee, In-Kook Suh et al.
1 links
Minerals
Iron and Steelmaking Processes
article

Effect of By-Product-Derived Low-Melting-Point Additive on Mineralogical and Metallurgical Properties of Iron Ore Sinter

Seung Seok Oh, Joonho Lee, Jonghyup Lee, In-Kook Suh, In Ae Song, Haeun Kim, Junyong Kim
article en

Abstract

Reducing solid fuel consumption in iron ore sintering is an important strategy for lowering fossil fuel use and associated CO2 emissions. However, insufficient heat input can limit liquid-phase formation and compromise sinter quality. In this study, a by-product-derived low-melting-point additive (LMA) was used under reduced-fuel sintering condition, and the resulting mineralogical characteristics, pore structural, and metallurgical properties were evaluated. Preformed Ca–Fe–O phases accounted for 46.2 wt.% of the quantified crystalline phase assemblage in the LMA. Differential scanning calorimetry revealed a thermal event near 1200 °C, interpreted as being associated with the onset of liquid-phase formation. In sinter pot tests, the LMA-containing reduced-fuel condition (RFL) exhibited a lower maximum bed temperature than the conventional reference condition (STD), decreasing from 1375 to 1339 °C. With the mean STD values normalized to 100%, the relative mean reducibility index, tumble index, and reduction disintegration index of RFL were 104.7%, 101.8%, and 100.3%, respectively, indicating that these quality indices remained broadly comparable despite the reduced fuel input. Rietveld refinement indicated a higher magnetite fraction and a lower SFCA-I fraction in RFL, suggesting that the higher mean reducibility could not be explained by bulk mineralogy alone. Optical microscopy of entire specimen cross-sections revealed a lower pore area fraction and a more consolidated structure in RFL, whereas mercury intrusion porosimetry indicated that mercury-accessible pore volume associated with pore-entry sized below 50 μm was largely maintained. Overall, these findings suggest that the combined use of LMA and reduced fuel input can maintain sinter quality at a lower maximum bed temperature. The pore-structure results provide a possible explanation for the higher mean reducibility despite the mineralogical changes, although a causal relationship has not been established.

MineralsVol. 16(11)
Hyundai Steel (South Korea) (KR), Korea University (KR)
Korea Evaluation Institute of Industrial Technology, Korea Institute of Energy Technology Evaluation and Planning
Responsible consumption and production, Affordable and clean energy
Iron and Steelmaking Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon