High-Speed Erosion Characteristics and Prediction Model of TC4 Considering SiO₂ Particle Fracture
To examine the coupled responses of particle fragmentation and target-material removal during high-speed sand and dust impact, gas–solid erosion tests were conducted on TC4 titanium alloy using SiO₂ particles with a median diameter of 74.06 μm at different impact velocities and angles. The particle-size distribution, change in volume-specific surface area, and target erosion rate were evaluated. At 90°, increasing particle velocity from 100 to 250 m/s increased the target erosion rate by 184.03% and the particle specific-surface-area change by 264.47%. At 175 m/s, target erosion was highest at 15° and lowest at 80°, whereas particle fragmentation was most pronounced near 70°. On the basis of an approximate collision-energy partition and the E/CRC model form, a calibrated semi-empirical erosion-rate correlation was developed with particle specific-surface-area change as an auxiliary fracture descriptor and compared with the Oka model. Target removal and particle refinement exhibited different velocity and angular dependences, suggesting that measured particle-fracture response can complement conventional descriptions of erosion by fragmentable sand particles.
Authors
- Guan Yang
- Shaosen Shi
- Xingyu Luo
- Xiaojun Yang
- Fengwei Hao
Institutions
- Civil Aviation University of China (CN)
Publication Details
- Journal
- Tribology Transactions
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1080/10402004.2026.2762704
- Primary Topic
- Erosion and Abrasive Machining
- Type
- article
- Field-Weighted Citation Impact
- 0.00