Effects of Resistance Compensation on Laser-Induced Graphene Electrodes

Abstract Laser-induced graphene (LIG) offers a promising approach for fabricating low-cost, flexible, and disposable electrochemical sensors. However, the electrical resistance associated with thin conductive tracks and their connections can introduce substantial ohmic potential losses, compromising potential control and distorting electrochemical measurements. Here, we report a paper-based LIG electrochemical platform incorporating a four-terminal configuration designed to minimize resistance-related distortions through separate current-carrying and potential-sensing pathways. The electrodes were fabricated by direct CO2 laser scribing of Kraft paper, producing a porous, graphene-like carbon network characterized by scanning electron microscopy and Raman spectroscopy. The electrochemical effects of resistance compensation were systematically investigated using cyclic voltammetry and electrochemical impedance spectroscopy with ferricyanide/ferrocyanide, hexaammineruthenium, dopamine, and paracetamol. Resistance compensation substantially improved voltammetric peak definition and potential control, shifting the dopamine oxidation peak from 0.70 to 0.40 V and reducing the fitted uncompensated series resistance from 197 to 35 Ω for hexaammineruthenium. In contrast, the charge-transfer resistance remained nearly unchanged, indicating that the observed improvements primarily resulted from reduced ohmic distortions rather than changes in intrinsic electron-transfer kinetics. Under resistance-compensated conditions, the LIG electrodes enabled dopamine determination over 120–900 μmol L–1, with a detection limit of 29 μmol L–1, and paracetamol determination over 125–1660 μmol L–1, with a detection limit of 37 μmol L–1, using cyclic voltammetry. Differential pulse voltammetry further improved paracetamol detection, achieving a detection limit of 2.5 μmol L–1 over a linear range of 10–60 μmol L–1. The proposed platform was successfully applied to paracetamol determination in commercial pharmaceutical tablets, providing a recovery of 93%, in close agreement with the 94% obtained by high-performance liquid chromatography. The integration of laser-based fabrication and resistance compensation provides a practical strategy for minimizing measurement artifacts and improving the reliability of low-cost, paper-based electrochemical sensors.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-12
DOI
https://doi.org/10.1021/acsomega.6c12460
Primary Topic
Electrochemical sensors and biosensors
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of Resistance Compensation on Laser-Induced Graphene Electrodes

Eleilton da Silva, Lúcio Angnes, Nathália F. B. Azeredo, Claudimir Lúcio do Lago et al.
ACS Omega
Electrochemical sensors and biosensors
article

Effects of Resistance Compensation on Laser-Induced Graphene Electrodes

Eleilton da Silva, Lúcio Angnes, Nathália F. B. Azeredo, Claudimir Lúcio do Lago, Irlan S. Lima, Thawan G. Oliveira
article en

Abstract

Abstract Laser-induced graphene (LIG) offers a promising approach for fabricating low-cost, flexible, and disposable electrochemical sensors. However, the electrical resistance associated with thin conductive tracks and their connections can introduce substantial ohmic potential losses, compromising potential control and distorting electrochemical measurements. Here, we report a paper-based LIG electrochemical platform incorporating a four-terminal configuration designed to minimize resistance-related distortions through separate current-carrying and potential-sensing pathways. The electrodes were fabricated by direct CO2 laser scribing of Kraft paper, producing a porous, graphene-like carbon network characterized by scanning electron microscopy and Raman spectroscopy. The electrochemical effects of resistance compensation were systematically investigated using cyclic voltammetry and electrochemical impedance spectroscopy with ferricyanide/ferrocyanide, hexaammineruthenium, dopamine, and paracetamol. Resistance compensation substantially improved voltammetric peak definition and potential control, shifting the dopamine oxidation peak from 0.70 to 0.40 V and reducing the fitted uncompensated series resistance from 197 to 35 Ω for hexaammineruthenium. In contrast, the charge-transfer resistance remained nearly unchanged, indicating that the observed improvements primarily resulted from reduced ohmic distortions rather than changes in intrinsic electron-transfer kinetics. Under resistance-compensated conditions, the LIG electrodes enabled dopamine determination over 120–900 μmol L–1, with a detection limit of 29 μmol L–1, and paracetamol determination over 125–1660 μmol L–1, with a detection limit of 37 μmol L–1, using cyclic voltammetry. Differential pulse voltammetry further improved paracetamol detection, achieving a detection limit of 2.5 μmol L–1 over a linear range of 10–60 μmol L–1. The proposed platform was successfully applied to paracetamol determination in commercial pharmaceutical tablets, providing a recovery of 93%, in close agreement with the 94% obtained by high-performance liquid chromatography. The integration of laser-based fabrication and resistance compensation provides a practical strategy for minimizing measurement artifacts and improving the reliability of low-cost, paper-based electrochemical sensors.

ACS Omega
Universidade de São Paulo (BR)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Conselho Nacional de Desenvolvimento Científico e Tecnológico, Fundação de Apoio à Universidade de São Paulo
Electrochemical sensors and biosensors
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon