Extrusion-based 3D printing of 3YSZ–calcium phosphate composite scaffolds
Abstract Extrusion-based 3D printing was employed to fabricate scaffolds from ceramic pastes comprising 3 mol% yttria-stabilised zirconia (3YSZ) and tricalcium phosphate (Ca₃(PO₄)₂, CaP). Pristine 3YSZ exhibited densities of 3.5–5.2 g cm⁻³, substantially exceeding the density of natural bone. Incorporation of 30–45 wt% CaP reduced the density to 2.2–2.5 g cm⁻³, approaching bone-like values. X-ray diffraction and Raman spectroscopy confirmed the stability of the tetragonal zirconia phase and the formation of phosphate-related phases attributed to hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP). The optimized composites combined reduced density with good phase stability and mechanical performance. Compact cylindrical specimens exhibited a Young’s modulus of 524 ± 88 MPa and an ultimate compressive strength of 180 ± 5.8 MPa. Notably, HGF-1 fibroblast viability and adhesion remained comparable to the control over seven days. These results demonstrate the potential of 3YSZ–CaP composites as lightweight, mechanically robust materials for bone-mimetic scaffolds.
Authors
- Catarina Bianchi (ORCID: https://orcid.org/0000-0002-1550-8400)
- I. Ferreira (ORCID: https://orcid.org/0000-0002-8838-0364)
- M. Brito
- C. C. Carmo
- A. Baptista
- J. Marques
- A. Rovisco
- R. Barbosa
Institutions
- University of Lisbon (PT)
- Universidade Nova de Lisboa (PT)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-12
- DOI
- https://doi.org/10.21203/rs.3.rs-11375679/v1
- Primary Topic
- Bone Tissue Engineering Materials
- Type
- preprint
Funders
- Fundação para a Ciência e a Tecnologia