Shock impedance mismatch and transmission loss in fiber–metal laminates: a computational and experimental study

Abstract The shielding performance of multi-layered sandwich structures is influenced by the shock impedance mismatch at material interfaces. In this study, an integrated computational, analytical, and experimental framework was developed to evaluate the acoustic transmission loss (TL) of fiber–metal laminates (FMLs) incorporating fabric-reinforced polymer core plies. A dimensionless shock-impedance formulation based on the Buckingham- $$\pi $$ theorem was employed to examine the influence of material properties, including Poisson’s ratio, on three-dimensional elastic wave propagation and aid in material selection. A mesoscale representative volume element (RVE) approach was used to derive the effective orthotropic properties of aramid-, basalt-, and Zylon-reinforced plies, which were subsequently incorporated into a macroscale finite-element (FE) harmonic-acoustics framework to evaluate TL over the 63–1300,Hz frequency range. In parallel, a multi-layer analytical formulation was developed to estimate insertion loss and the corresponding frequency-dependent TL response. The empirical parameters of the analytical model were calibrated using a single baseline configuration and subsequently applied to six additional stacking sequences, for which the mean TL difference from the corresponding FE predictions remained below $$3.06\%$$ . Impedance-tube measurements of the baseline Al–Ba–Ba–Ba–Ba–Al configuration provided an experimental benchmark for comparison with the analytical and numerical predictions. Among the configurations investigated, the all-aramid sequence exhibited the highest mean numerical TL, while aramid–basalt and Zylon–basalt hybridization increased the mean TL relative to the all-basalt configuration. The experimental measurements exhibited a stronger frequency-dependent reduction in TL than the idealized analytical and FE predictions, highlighting the influence of physical and boundary effects not completely captured in the computational models. Overall, the proposed multi-scale framework provides an efficient approach for evaluating material combinations and stacking sequences, facilitating the preliminary design and comparative assessment of FMLs for low-to-mid-frequency shock shielding applications.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-12
DOI
https://doi.org/10.1038/s41598-026-79854-8
Primary Topic
Acoustic Wave Phenomena Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Shock impedance mismatch and transmission loss in fiber–metal laminates: a computational and experimental study

Jeppu Pramod Jaideep, Marcos Rodríguez-Millán, B. Satish Shenoy, Suhas Yeshwant Nayak et al.
Scientific Reports
Acoustic Wave Phenomena Research
article

Shock impedance mismatch and transmission loss in fiber–metal laminates: a computational and experimental study

Jeppu Pramod Jaideep, Marcos Rodríguez-Millán, B. Satish Shenoy, Suhas Yeshwant Nayak, Sriharsha Hegde, Anand Pai
article en

Abstract

Abstract The shielding performance of multi-layered sandwich structures is influenced by the shock impedance mismatch at material interfaces. In this study, an integrated computational, analytical, and experimental framework was developed to evaluate the acoustic transmission loss (TL) of fiber–metal laminates (FMLs) incorporating fabric-reinforced polymer core plies. A dimensionless shock-impedance formulation based on the Buckingham- $$\pi $$ theorem was employed to examine the influence of material properties, including Poisson’s ratio, on three-dimensional elastic wave propagation and aid in material selection. A mesoscale representative volume element (RVE) approach was used to derive the effective orthotropic properties of aramid-, basalt-, and Zylon-reinforced plies, which were subsequently incorporated into a macroscale finite-element (FE) harmonic-acoustics framework to evaluate TL over the 63–1300,Hz frequency range. In parallel, a multi-layer analytical formulation was developed to estimate insertion loss and the corresponding frequency-dependent TL response. The empirical parameters of the analytical model were calibrated using a single baseline configuration and subsequently applied to six additional stacking sequences, for which the mean TL difference from the corresponding FE predictions remained below $$3.06\%$$ . Impedance-tube measurements of the baseline Al–Ba–Ba–Ba–Ba–Al configuration provided an experimental benchmark for comparison with the analytical and numerical predictions. Among the configurations investigated, the all-aramid sequence exhibited the highest mean numerical TL, while aramid–basalt and Zylon–basalt hybridization increased the mean TL relative to the all-basalt configuration. The experimental measurements exhibited a stronger frequency-dependent reduction in TL than the idealized analytical and FE predictions, highlighting the influence of physical and boundary effects not completely captured in the computational models. Overall, the proposed multi-scale framework provides an efficient approach for evaluating material combinations and stacking sequences, facilitating the preliminary design and comparative assessment of FMLs for low-to-mid-frequency shock shielding applications.

Scientific Reports
Manipal Academy of Higher Education (IN), Universidad Carlos III de Madrid (ES)
European Commission, HORIZON EUROPE Marie Sklodowska-Curie Actions
Acoustic Wave Phenomena Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon