Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers

The stone industry generates a large amount of sawing sludge (SS). Geopolymers (GPs) offer a circular pathway by incorporating SS into their aluminosilicate networks, helping to mitigate the environmental impact on the construction industry. This preliminary study addresses the feasibility of using four types of SS (SS1–SS4) in metakaolin-based GP formulation, evaluating the effect of two granulometries (75 µm < x < 125 µm and 125 µm < x < 300 µm) on GP properties. Geopolymerization is confirmed through Fourier-transform infrared (FT-IR) spectroscopy, while integrity and boiling water tests confirm that all samples maintained their integrity under the selected preliminary experimental conditions. Microstructural and mineralogical characteristics, investigated by scanning electron microscopy (SEM) and wide-angle X-ray diffraction (WAXD), respectively, reveal heterogeneous microstructures characterized by the presence of unreacted crystalline particles. Thermal behavior, examined through thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG), reveals total mass losses of approximately 15–18% up to 1000 °C, with an additional loss in the 500–800 °C range associated with carbonate decomposition, which is particularly evident in SS2, GP2/1, and GP2/2. Mechanical properties, through compressive strength tests, reveal higher values for GP2/1 (24.1 ± 0.4 MPa) and GP4/2 (24.7 ± 1.7 MPa) than for the GP0 control (22.5 ± 0.2 MPa). These preliminary findings support further investigations concerning the use of sawing sludges as fillers in sustainable alkali-activated materials.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-12
DOI
https://doi.org/10.3390/ma19224804
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers

Roberto Simonelli, Luigi Mollo, Sara Fasana, Marco Zerbinatti et al.
Materials
Concrete and Cement Materials Research
article

Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers

Roberto Simonelli, Luigi Mollo, Sara Fasana, Marco Zerbinatti, Michelina Catauro, Luigi Vertuccio, Antonio D’Angelo, Davide Nonis
article en

Abstract

The stone industry generates a large amount of sawing sludge (SS). Geopolymers (GPs) offer a circular pathway by incorporating SS into their aluminosilicate networks, helping to mitigate the environmental impact on the construction industry. This preliminary study addresses the feasibility of using four types of SS (SS1–SS4) in metakaolin-based GP formulation, evaluating the effect of two granulometries (75 µm < x < 125 µm and 125 µm < x < 300 µm) on GP properties. Geopolymerization is confirmed through Fourier-transform infrared (FT-IR) spectroscopy, while integrity and boiling water tests confirm that all samples maintained their integrity under the selected preliminary experimental conditions. Microstructural and mineralogical characteristics, investigated by scanning electron microscopy (SEM) and wide-angle X-ray diffraction (WAXD), respectively, reveal heterogeneous microstructures characterized by the presence of unreacted crystalline particles. Thermal behavior, examined through thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG), reveals total mass losses of approximately 15–18% up to 1000 °C, with an additional loss in the 500–800 °C range associated with carbonate decomposition, which is particularly evident in SS2, GP2/1, and GP2/2. Mechanical properties, through compressive strength tests, reveal higher values for GP2/1 (24.1 ± 0.4 MPa) and GP4/2 (24.7 ± 1.7 MPa) than for the GP0 control (22.5 ± 0.2 MPa). These preliminary findings support further investigations concerning the use of sawing sludges as fillers in sustainable alkali-activated materials.

MaterialsVol. 19(22)
University of Salerno (IT), Politecnico di Torino (IT), University of Campania "Luigi Vanvitelli" (IT)
Responsible consumption and production
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon