Numerical Simulation of p-Terphenyl Crystal Growth by Bridg-Man Technique Assisted by Axial Low-Frequency Oscillations of the Melt
The influence of forced convection induced by axial low-frequency oscillations of an inert body on the melt hydrodynamics and crystallization front morphology during the vertical Bridgman growth of p-terphenyl single crystals was investigated by numerical simulations. An efficient numerical technique using a P-controller-based momentum source term was developed, which allowed the transient integration time step to be increased to ∆t = 0.1 s and ensured high computational stability without the need for direct modeling of high-frequency disk oscillations. It was established that for moderate forced convection intensities, the maximum melt flow velocity correlates linearly with the maximum disk velocity vmax ≈ 2Aω. The analysis of energetic characteristics demonstrated a cubic scaling of the time-averaged viscous dissipation power Qµ proportional to A3ω3. Efficient stabilization of the crystallization front was successfully demonstrated by vibrations of the triangular cross-section disk.
Authors
- Artem Anatolevich Atlaskin (ORCID: https://orcid.org/0000-0001-9662-8115)
- Костиков Владимир Анатольевич (ORCID: https://orcid.org/0000-0002-8602-8543)
- Igor Avetissov
- Roman Avetisov
- Alexey Dovnarovich
- Kate Trishina
Publication Details
- Journal
- Preprints.org
- Published
- 2026-11-12
- DOI
- https://doi.org/10.20944/preprints202611.1267.v1
- Primary Topic
- Solidification and crystal growth phenomena
- Type
- preprint