Design Blueprint: A Bucket-Wheel Excavator for Lunar Polar Mining Sized from Excavation-Energy and Traction Bounds
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24151917): This paper presents the sizing of a surface system for the Moon, designed around a single operating principle and computed from published material properties of its working environment. The headline results are: regolith production rate of 21,498 kg/h; wheel cutting power of 4,478.654 W; total power of 5,078.654 W. The total mass is 472.8 kg including a twenty percent margin over the component subtotal. Every figure was produced by the accompanying computation script from stated assumptions about density, strength, thermal properties and composition; no figure is asserted without its derivatio Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24152210
- Primary Topic
- Soil Mechanics and Vehicle Dynamics
- Type
- preprint