Numerical Study of Load Resolution Effects on Icebreaker Structural Response

To provide reliable evaluation of structure safety, it is essential to investigate the influences of ice load distribution on the structural response. In this paper, numerical simulation was carried out on a typical bow structure of an icebreaker under non-uniform loads. To obtain the ice load distribution, the Discrete Element Method (DEM) was employed under the scenario of the Xuelong 2 icebreaker advancing at 2 knots in 2 m thick level ice. Based on the results, ice load distribution models with various spatial resolutions were established for structural analysis. To study the structural response, the Finite Element Method (FEM) was applied to a bow structure composed of frames, plates, and stiffeners. The results demonstrate that the structural response exhibits significant dependence on the load resolution. For Event 1, the maximum von Mises stress rises with resolution up to a subzone width of about 600 mm (12 subzones, i.e., 1.5 frame spacings) and changes more gradually thereafter. This behavior can be attributed to the fact that the subzone number governs the characteristic dimension of local loading zones. Finer subzones better preserve local pressure concentrations and their positions relative to the frames. At Position A and a resultant of 350 kN, uniform loading over the same footprint underestimates the peak von Mises stress, principal strain and displacement by 55%, 46% and 27%, respectively, relative to the 48-subzone field. The results for Events 2–4 indicate that these load distributions may require a greater number of subzones than Event 1. Because coarsening preserves the resultant and the loaded area, the response differences reported here are attributable to the spatial resolution of the pressure field alone. The results provide a quantitative basis for selecting load resolution in local structural assessment. However, these findings are based on a single bow configuration and four DEM events and have not yet been experimentally validated.

Authors

Institutions

Publication Details

Journal
Journal of Marine Science and Engineering
Published
2026-11-12
DOI
https://doi.org/10.3390/jmse14222149
Primary Topic
Ship Hydrodynamics and Maneuverability
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Numerical Study of Load Resolution Effects on Icebreaker Structural Response

Zhenqiao Zhu, 李金成, Weiping Yu, Xiaodong Chen et al.
Journal of Marine Science and Engineering
Ship Hydrodynamics and Maneuverability
article

Numerical Study of Load Resolution Effects on Icebreaker Structural Response

Zhenqiao Zhu, 李金成, Weiping Yu, Xiaodong Chen, Shunying Ji, Ning Wang, Jiangfeng Song
article en

Abstract

To provide reliable evaluation of structure safety, it is essential to investigate the influences of ice load distribution on the structural response. In this paper, numerical simulation was carried out on a typical bow structure of an icebreaker under non-uniform loads. To obtain the ice load distribution, the Discrete Element Method (DEM) was employed under the scenario of the Xuelong 2 icebreaker advancing at 2 knots in 2 m thick level ice. Based on the results, ice load distribution models with various spatial resolutions were established for structural analysis. To study the structural response, the Finite Element Method (FEM) was applied to a bow structure composed of frames, plates, and stiffeners. The results demonstrate that the structural response exhibits significant dependence on the load resolution. For Event 1, the maximum von Mises stress rises with resolution up to a subzone width of about 600 mm (12 subzones, i.e., 1.5 frame spacings) and changes more gradually thereafter. This behavior can be attributed to the fact that the subzone number governs the characteristic dimension of local loading zones. Finer subzones better preserve local pressure concentrations and their positions relative to the frames. At Position A and a resultant of 350 kN, uniform loading over the same footprint underestimates the peak von Mises stress, principal strain and displacement by 55%, 46% and 27%, respectively, relative to the 48-subzone field. The results for Events 2–4 indicate that these load distributions may require a greater number of subzones than Event 1. Because coarsening preserves the resultant and the loaded area, the response differences reported here are attributable to the spatial resolution of the pressure field alone. The results provide a quantitative basis for selecting load resolution in local structural assessment. However, these findings are based on a single bow configuration and four DEM events and have not yet been experimentally validated.

Journal of Marine Science and EngineeringVol. 14(22)
Dalian University of Technology (CN), Wuhan Ship Development & Design Institute (CN)
Ship Hydrodynamics and Maneuverability
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon