Electro-thermo-mechanical finite element modeling of shape memory composite structures: material model, training, and actuation

Abstract Structurally integrated composite actuators offer great potential for compact, lightweight actuation systems. Embedding shape memory alloy (SMA) wires into an elastomeric matrix enables an intrinsic two-way effect, eliminating the need for external reset forces. Simulation-based design has so far been limited by the lack of a closed electro-thermo-mechanical modeling environment. This work presents such an environment, implementing a three-dimensional finite-strain material model for coupled multiphysics simulations in COMSOL Multiphysics and capturing both the thermo-mechanical training of the SMA wire and the subsequent electro-thermal composite actuation. The environment is validated on an additively manufactured NiTi-TPU composite actuator, where the simulated maximum tip deflection after heating deviates by 5.3% from experimental data. On this basis, the spatio-temporal phase transformation within the embedded wire is analyzed. With material parameters adopted from literature rather than identified on the wire used, the simulation predicts that the compliant matrix loads the eccentric wire mainly in axial tension. As the backstress aligns with the current stress in the model, it stays axial, and the wire transforms almost simultaneously. Extending the simulation to the cooling phase, the environment predicts a complete two-way stroke recovery, which was not measured experimentally. The gap of the printed groove governs the activation time. The proposed environment provides a foundation, validated for the actuation stroke during heating, for designing structurally integrated SMA composite actuators and can be extended to other geometries.

Authors

Institutions

Publication Details

Journal
Smart Materials and Structures
Published
2026-11-12
DOI
https://doi.org/10.1088/1361-665x/aec1a8
Primary Topic
Shape Memory Alloy Transformations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Electro-thermo-mechanical finite element modeling of shape memory composite structures: material model, training, and actuation

Thomas M. Wendt, Thomas Seifert, Alexander Dierle
Smart Materials and Structures
Shape Memory Alloy Transformations
article

Electro-thermo-mechanical finite element modeling of shape memory composite structures: material model, training, and actuation

Thomas M. Wendt, Thomas Seifert, Alexander Dierle
article en

Abstract

Abstract Structurally integrated composite actuators offer great potential for compact, lightweight actuation systems. Embedding shape memory alloy (SMA) wires into an elastomeric matrix enables an intrinsic two-way effect, eliminating the need for external reset forces. Simulation-based design has so far been limited by the lack of a closed electro-thermo-mechanical modeling environment. This work presents such an environment, implementing a three-dimensional finite-strain material model for coupled multiphysics simulations in COMSOL Multiphysics and capturing both the thermo-mechanical training of the SMA wire and the subsequent electro-thermal composite actuation. The environment is validated on an additively manufactured NiTi-TPU composite actuator, where the simulated maximum tip deflection after heating deviates by 5.3% from experimental data. On this basis, the spatio-temporal phase transformation within the embedded wire is analyzed. With material parameters adopted from literature rather than identified on the wire used, the simulation predicts that the compliant matrix loads the eccentric wire mainly in axial tension. As the backstress aligns with the current stress in the model, it stays axial, and the wire transforms almost simultaneously. Extending the simulation to the cooling phase, the environment predicts a complete two-way stroke recovery, which was not measured experimentally. The gap of the printed groove governs the activation time. The proposed environment provides a foundation, validated for the actuation stroke during heating, for designing structurally integrated SMA composite actuators and can be extended to other geometries.

Smart Materials and Structures
Offenburg University of Applied Sciences (DE)
Shape Memory Alloy Transformations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon