Gold Nanoparticles Stabilized by TEMPO-Oxidized Cellulose Nanofibers: Improved Redispersion and Colloidal Stability toward Sensing Platforms

Abstract Gold nanoparticles stabilized by TEMPO-oxidized cellulose nanofibers, AuNP-TEMPO, have emerged as promising sustainable nanomaterials, but their colloidal stability and integration into well-defined electroactive architectures for technological applications remain challenging. Here, AuNP-TEMPO were synthesized and subjected to a mild alkaline washing step to improve their macroscopic redispersion behavior and aqueous homogeneity for sensing applications. FTIR and UV–vis analyses indicated changes in AuNP-TEMPO surface chemistry after washing, consistent with deprotonation of carboxylic groups and modulation of the plasmonic response, while TEM confirmed the formation of well-dispersed nanoparticles within a cellulose-derived matrix. The washed AuNP-TEMPO suspension was then combined with chitosan to produce multilayer films by the layer-by-layer (LbL) method. Compared with casting films, the LbL architecture provided better structural organization and controlled buildup, as evidenced by FTIR and UV–vis measurements. Electrochemical characterization showed that increasing the number of bilayers enhanced the amount of electrochemically accessible gold, with the 30-bilayer film exhibiting the best performance. This film was then applied to Cu2+ detection using linear sweep anodic stripping voltammetry, showing a concentration-dependent response with two linear ranges, 10 to 100 ppb and 200 to 400 ppb, and limits of detection of 0.54 and 3.0 ppb, respectively. Taken together, these results indicate that AuNP-TEMPO/chitosan multilayers constitute renewable and tunable electroactive interfaces with promising potential for copper stripping detection.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-12
DOI
https://doi.org/10.1021/acsomega.6c08635
Primary Topic
Gold and Silver Nanoparticles Synthesis and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Gold Nanoparticles Stabilized by TEMPO-Oxidized Cellulose Nanofibers: Improved Redispersion and Colloidal Stability toward Sensing Platforms

Débora Terezia Balogh, Kelcilene B. R. Teodoro, Waldir Avansi, Daniel Souza Correa et al.
ACS Omega
Gold and Silver Nanoparticles Synthesis and Applications
article

Gold Nanoparticles Stabilized by TEMPO-Oxidized Cellulose Nanofibers: Improved Redispersion and Colloidal Stability toward Sensing Platforms

Débora Terezia Balogh, Kelcilene B. R. Teodoro, Waldir Avansi, Daniel Souza Correa, Rafael Grande, Adriana Pavinatto, Rafaela C. Sanfelice
article en

Abstract

Abstract Gold nanoparticles stabilized by TEMPO-oxidized cellulose nanofibers, AuNP-TEMPO, have emerged as promising sustainable nanomaterials, but their colloidal stability and integration into well-defined electroactive architectures for technological applications remain challenging. Here, AuNP-TEMPO were synthesized and subjected to a mild alkaline washing step to improve their macroscopic redispersion behavior and aqueous homogeneity for sensing applications. FTIR and UV–vis analyses indicated changes in AuNP-TEMPO surface chemistry after washing, consistent with deprotonation of carboxylic groups and modulation of the plasmonic response, while TEM confirmed the formation of well-dispersed nanoparticles within a cellulose-derived matrix. The washed AuNP-TEMPO suspension was then combined with chitosan to produce multilayer films by the layer-by-layer (LbL) method. Compared with casting films, the LbL architecture provided better structural organization and controlled buildup, as evidenced by FTIR and UV–vis measurements. Electrochemical characterization showed that increasing the number of bilayers enhanced the amount of electrochemically accessible gold, with the 30-bilayer film exhibiting the best performance. This film was then applied to Cu2+ detection using linear sweep anodic stripping voltammetry, showing a concentration-dependent response with two linear ranges, 10 to 100 ppb and 200 to 400 ppb, and limits of detection of 0.54 and 3.0 ppb, respectively. Taken together, these results indicate that AuNP-TEMPO/chitosan multilayers constitute renewable and tunable electroactive interfaces with promising potential for copper stripping detection.

ACS Omega
Universidade Federal de São Carlos (BR), Universidade de São Paulo (BR), Embrapa Instrumentação (BR)
Fundação de Amparo à Pesquisa do Estado de São Paulo, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Conselho Nacional de Desenvolvimento Científico e Tecnológico
Gold and Silver Nanoparticles Synthesis and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon