Partially decoupling cell size and density as tailorable design parameters in mSLA-printed gyroid cores for sustainable sandwich panels

Abstract Lightweight sandwich cores can be tailored to the load case, yet design rules linking lattice architecture to core and panel performance are lacking for vat photopolymerisation. Sheet-network gyroid lattices were printed by masked stereolithography (mSLA) from a partially biobased PLA-based resin across a full factorial of unit cell size (5–20 mm) and nominal density (5–20%). The printable window, density, wall thickness and compressive properties were characterised. Selected cores were integrated into sandwich panels with basalt fibre facesheets in a partially biobased epoxy matrix and tested in flexure. Printability was bounded by wall separation below ≈ 130 µm and by resin entrapment in 5 mm cells at high density. Cell size controlled wall thickness (132–271 µm at 5% density), whilst apparent density was independent of cell size at low density (p ≥ 0.14), so the two act as partially decoupled design levers. Compressive strength followed bending-dominated Gibson–Ashby scaling (n ≈ 1.5 in the defect-free range and ≈ 2 across the full window). A cell-size effect on strength was robust at 20% density on raw and ρ²-normalised bases, and emerging at 15%. It is attributed to coupled wall thickness and cell count rather than the architecture itself. Panel flexural rankings matched core rankings. The 20 mm/20% core yielded the stiffest panels whilst the 5 mm/10% core gave the most strain-tolerant, benignly failing panels. These results establish mSLA gyroid lattices as tailorable sandwich cores, provide indicative design rules for core selection, and show that partially biobased constituents can form structurally efficient sandwich panels.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-12
DOI
https://doi.org/10.21203/rs.3.rs-11455393/v1
Primary Topic
Cellular and Composite Structures
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Partially decoupling cell size and density as tailorable design parameters in mSLA-printed gyroid cores for sustainable sandwich panels

Sherlyn Gabriel, James Anthony Dicks, Maxwell Vos, Lwazi Luthuli et al.
Research Square
Cellular and Composite Structures
preprint

Partially decoupling cell size and density as tailorable design parameters in mSLA-printed gyroid cores for sustainable sandwich panels

Sherlyn Gabriel, James Anthony Dicks, Maxwell Vos, Lwazi Luthuli, Samuel Schlesinger, Mikael Christodoulides¹
preprint en

Abstract

Abstract Lightweight sandwich cores can be tailored to the load case, yet design rules linking lattice architecture to core and panel performance are lacking for vat photopolymerisation. Sheet-network gyroid lattices were printed by masked stereolithography (mSLA) from a partially biobased PLA-based resin across a full factorial of unit cell size (5–20 mm) and nominal density (5–20%). The printable window, density, wall thickness and compressive properties were characterised. Selected cores were integrated into sandwich panels with basalt fibre facesheets in a partially biobased epoxy matrix and tested in flexure. Printability was bounded by wall separation below ≈ 130 µm and by resin entrapment in 5 mm cells at high density. Cell size controlled wall thickness (132–271 µm at 5% density), whilst apparent density was independent of cell size at low density (p ≥ 0.14), so the two act as partially decoupled design levers. Compressive strength followed bending-dominated Gibson–Ashby scaling (n ≈ 1.5 in the defect-free range and ≈ 2 across the full window). A cell-size effect on strength was robust at 20% density on raw and ρ²-normalised bases, and emerging at 15%. It is attributed to coupled wall thickness and cell count rather than the architecture itself. Panel flexural rankings matched core rankings. The 20 mm/20% core yielded the stiffest panels whilst the 5 mm/10% core gave the most strain-tolerant, benignly failing panels. These results establish mSLA gyroid lattices as tailorable sandwich cores, provide indicative design rules for core selection, and show that partially biobased constituents can form structurally efficient sandwich panels.

Research Square
University of Cape Town (ZA)
National Research Foundation
Cellular and Composite Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon