Constructing a Flower-Like Microspherical Multifunctional Co3O4-NiO/mSiO2 Heterostructure toward Synergistic Regulation of Polysulfide with Ultrafast Charge Transfer Kinetics

Abstract The shuttle effect of lithium polysulfides (LiPSs) and their sluggish redox reaction kinetics severely impede the utilization efficiency of sulfur (S) and significantly deteriorate the cycling stability of lithium-sulfur (Li–S) batteries. Herein, a three-dimensional (3D) flower-like microspherical nanoarchitecture (Co3O4-NiO/mSiO2), in which the Co3O4-NiO heterojunction nanosheets are uniformly anchored onto mesoporous silica (mSiO2) nanospheres, is synthesized. This architecture is synthesized via a scalable hydrothermal approach. As a separator-modifying component, the mSiO2 nanospheres serve as structural templates, while the Co3O4-NiO heterointerfaces, rich in surface polar sites, provide dual functionality: (i) abundant chemical anchoring sites and intrinsically catalytic active sites for LiPSs, and (ii) a 3D mesoporous conductive network enabling efficient, coupled e–/Li+ transport. Owing to these advantages, the Li–S battery achieves an initial discharge capacity of 1017.6 mAh g–1 and retains 68% of that capacity after 1000 cycles at 2 C. Crucially, under realistic conditions of high S loading (5.1 mg cm–2) and lean electrolyte (E/S = 3.0 μL mg–1), the battery delivers a volumetric capacity of 804.1 Ah L–1 and an energy density of 1728.9 Wh L–1, retaining 864.5 Wh L–1 after 100 cycles. Furthermore, a prototype pouch battery delivered an initial discharge specific capacity of 986.3 mAh g–1 at 0.1 C with an elevated E/S ratio (5.5 μL mg–1). Collectively, this deep work demonstrate that rational engineering of a 3D heterostructured separator modifier constitutes a viable and scalable strategy toward practical high-energy-density Li–S batteries.

Authors

Institutions

Publication Details

Journal
ACS Sustainable Chemistry & Engineering
Published
2026-11-12
DOI
https://doi.org/10.1021/acssuschemeng.6c08456
Primary Topic
Advanced Battery Materials and Technologies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Constructing a Flower-Like Microspherical Multifunctional Co3O4-NiO/mSiO2 Heterostructure toward Synergistic Regulation of Polysulfide with Ultrafast Charge Transfer Kinetics

Kaiyue Zhao, Xianting Qiu, Shang Gao, Xinwei Wang et al.
ACS Sustainable Chemistry & Engineering
Advanced Battery Materials and Technologies
article

Constructing a Flower-Like Microspherical Multifunctional Co3O4-NiO/mSiO2 Heterostructure toward Synergistic Regulation of Polysulfide with Ultrafast Charge Transfer Kinetics

Kaiyue Zhao, Xianting Qiu, Shang Gao, Xinwei Wang, Yong‐Wei Zhang, Li Yuemin, Wanqiang Liu, Qingcheng Liang
article en

Abstract

Abstract The shuttle effect of lithium polysulfides (LiPSs) and their sluggish redox reaction kinetics severely impede the utilization efficiency of sulfur (S) and significantly deteriorate the cycling stability of lithium-sulfur (Li–S) batteries. Herein, a three-dimensional (3D) flower-like microspherical nanoarchitecture (Co3O4-NiO/mSiO2), in which the Co3O4-NiO heterojunction nanosheets are uniformly anchored onto mesoporous silica (mSiO2) nanospheres, is synthesized. This architecture is synthesized via a scalable hydrothermal approach. As a separator-modifying component, the mSiO2 nanospheres serve as structural templates, while the Co3O4-NiO heterointerfaces, rich in surface polar sites, provide dual functionality: (i) abundant chemical anchoring sites and intrinsically catalytic active sites for LiPSs, and (ii) a 3D mesoporous conductive network enabling efficient, coupled e–/Li+ transport. Owing to these advantages, the Li–S battery achieves an initial discharge capacity of 1017.6 mAh g–1 and retains 68% of that capacity after 1000 cycles at 2 C. Crucially, under realistic conditions of high S loading (5.1 mg cm–2) and lean electrolyte (E/S = 3.0 μL mg–1), the battery delivers a volumetric capacity of 804.1 Ah L–1 and an energy density of 1728.9 Wh L–1, retaining 864.5 Wh L–1 after 100 cycles. Furthermore, a prototype pouch battery delivered an initial discharge specific capacity of 986.3 mAh g–1 at 0.1 C with an elevated E/S ratio (5.5 μL mg–1). Collectively, this deep work demonstrate that rational engineering of a 3D heterostructured separator modifier constitutes a viable and scalable strategy toward practical high-energy-density Li–S batteries.

ACS Sustainable Chemistry & Engineering
Changchun University of Science and Technology (CN), Jilin Normal University (CN)
Jilin Scientific and Technological Development Program
Affordable and clean energy
Advanced Battery Materials and Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon