Wall slip and surface-induced bias in steady-shear rheometry of magnetorheological fluids

Abstract Magnetorheological (MR) fluids are commonly characterized by parallel-plate rheometry, which also reproduces the shear conditions in MR clutches and brakes. The measured response, however, depends on wall boundary conditions. This study quantifies the effect of surface condition on complete steady-shear flow curves of a commercial MR fluid measured with smooth (PP) and roughened (PPR) plates at gap heights of 0.2–0.8 mm and several magnetic field strengths. PP systematically produced lower shear stresses than PPR, by more than 60% under the most unfavorable conditions. Under the residual field, the PP–PPR difference depended strongly on shear rate, whereas under applied fields it approached a field-dependent plateau. Changing the gap also changed the magnetic flux density in the sample by up to about 12%. After this effect was accounted for, the PPR yield stress under applied fields remained within about −4% to 6% without systematic gap dependence; gap-dependent differences therefore cannot be attributed solely to wall slip or confinement. A differential PP–PPR analysis indicated slip-dominated behavior under applied fields and non-uniform deformation across the gap under the residual field. For MR devices with slip-suppressing working surfaces, designs based on smooth-plate data may underestimate the torque by about 35–50%. Quantitative MR fluid measurements require the surface condition, measuring gap, and actual magnetic conditions in the sample to be controlled and reported.

Authors

Institutions

Publication Details

Journal
Smart Materials and Structures
Published
2026-11-12
DOI
https://doi.org/10.1088/1361-665x/aec1a9
Primary Topic
Vibration Control and Rheological Fluids
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wall slip and surface-induced bias in steady-shear rheometry of magnetorheological fluids

Barbara Stępień, Wojciech Horak
Smart Materials and Structures
Vibration Control and Rheological Fluids
article

Wall slip and surface-induced bias in steady-shear rheometry of magnetorheological fluids

Barbara Stępień, Wojciech Horak
article en

Abstract

Abstract Magnetorheological (MR) fluids are commonly characterized by parallel-plate rheometry, which also reproduces the shear conditions in MR clutches and brakes. The measured response, however, depends on wall boundary conditions. This study quantifies the effect of surface condition on complete steady-shear flow curves of a commercial MR fluid measured with smooth (PP) and roughened (PPR) plates at gap heights of 0.2–0.8 mm and several magnetic field strengths. PP systematically produced lower shear stresses than PPR, by more than 60% under the most unfavorable conditions. Under the residual field, the PP–PPR difference depended strongly on shear rate, whereas under applied fields it approached a field-dependent plateau. Changing the gap also changed the magnetic flux density in the sample by up to about 12%. After this effect was accounted for, the PPR yield stress under applied fields remained within about −4% to 6% without systematic gap dependence; gap-dependent differences therefore cannot be attributed solely to wall slip or confinement. A differential PP–PPR analysis indicated slip-dominated behavior under applied fields and non-uniform deformation across the gap under the residual field. For MR devices with slip-suppressing working surfaces, designs based on smooth-plate data may underestimate the torque by about 35–50%. Quantitative MR fluid measurements require the surface condition, measuring gap, and actual magnetic conditions in the sample to be controlled and reported.

Smart Materials and Structures
AGH University of Krakow (PL)
Akademia Górniczo-Hutnicza im. Stanislawa Staszica
Vibration Control and Rheological Fluids
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon