Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates

The fast-growing display industry demands coatings on increasingly large glass substrates. Conventional vertical magnetron sputtering requires a substrate carrier, which raises equipment cost and wastes material in carrier-covered regions. A carrier-free inclined-substrate configuration (85° inclination), therefore, offers higher material utilization and lower cost. This work presents the magnetic-circuit design and field-uniformity optimization of a large-area rectangular magnetron sputtering target for such substrates. The magnetic flux density between the target and the substrate is obtained from an analytical magnetic-charge integration model and compared with 3D magnetostatic COMSOL simulations using the “Magnetic Fields, No Currents” interface for N42 NdFeB magnets (1.3 T remanence). The straight section is optimized parametrically through flux-concentrating/guiding structures and magnet dimensions, and the end region is evaluated across four configurations. The adopted end design (a semicircular inner strip plus a semitoroidal outer ring) reduces the maximum curve separation Sm—the maximum lateral distance between the end-region and straight-section field curves—from 143 to 12.5 mm (a 91.3% reduction), while the peak horizontal flux density, measured at the cathode-sheath height along the erosion-zone centerline, changes from 58.3 to 54.7 mT. The 54.7 mT peak lies marginally above the 30–50 mT engineering target range and should be brought back into the interval in a subsequent refinement. This is a computational study; the predicted fields and the anticipated process benefits require experimental validation.

Authors

Institutions

Publication Details

Journal
Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena
Published
2026-11-12
DOI
https://doi.org/10.1116/6.0005869
Primary Topic
Low-Pressure Plasma Processing and Diagnostics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates

Congfang Hu, Wang Xian, 前程 赵, Yuxuan Peng et al.
Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena
Low-Pressure Plasma Processing and Diagnostics
article

Magnetic circuit design and magnetic field uniformity optimization of a magnetron sputtering system for large-size inclined substrates

Congfang Hu, Wang Xian, 前程 赵, Yuxuan Peng, Le Huang
article en

Abstract

The fast-growing display industry demands coatings on increasingly large glass substrates. Conventional vertical magnetron sputtering requires a substrate carrier, which raises equipment cost and wastes material in carrier-covered regions. A carrier-free inclined-substrate configuration (85° inclination), therefore, offers higher material utilization and lower cost. This work presents the magnetic-circuit design and field-uniformity optimization of a large-area rectangular magnetron sputtering target for such substrates. The magnetic flux density between the target and the substrate is obtained from an analytical magnetic-charge integration model and compared with 3D magnetostatic COMSOL simulations using the “Magnetic Fields, No Currents” interface for N42 NdFeB magnets (1.3 T remanence). The straight section is optimized parametrically through flux-concentrating/guiding structures and magnet dimensions, and the end region is evaluated across four configurations. The adopted end design (a semicircular inner strip plus a semitoroidal outer ring) reduces the maximum curve separation Sm—the maximum lateral distance between the end-region and straight-section field curves—from 143 to 12.5 mm (a 91.3% reduction), while the peak horizontal flux density, measured at the cathode-sheath height along the erosion-zone centerline, changes from 58.3 to 54.7 mT. The 54.7 mT peak lies marginally above the 30–50 mT engineering target range and should be brought back into the interval in a subsequent refinement. This is a computational study; the predicted fields and the anticipated process benefits require experimental validation.

Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and PhenomenaVol. 44(6)
Hunan University of Science and Technology (CN), Xiangtan Electric Manufacturing Group (China) (CN), Xiangtan University (CN)
Education Department of Hunan Province, Hunan Provincial Science and Technology Department, Scientific Research Foundation of Hunan Provincial Education Department
Low-Pressure Plasma Processing and Diagnostics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon