Zero-dimensional perovskite layer-based PSCs for high Voc ~ 1.4 volt: Combination of DFT and OghmaNano Software
Abstract In this study, numerical simulations conducted using the OghmaNano software are employed to investigate the impact of incorporating the zero-dimensional (0D) Cs 3 BiBr 6 perovskite material into a multi-layered, three-dimensional (3D) structure composed of CsGeCl 3 and double Cs 2 InCoCl 6 perovskite materials. The various dimensions of perovskite materials, including three-dimensional, double perovskite, and zero-dimensional structures, are used in the construction of perovskite solar cells (PSCs). The triple-layer architecture's analysis, including charge transport, carrier generation (G), recombination (R), light absorption, and reflection, were all simulated using the finite-difference drift-diffusion method. A detailed optical study shows that inserting a 50-nm thick 0D-Cs 3 BiBr 6 layer improves the process of converting light into electricity. It helps the material absorb more light in the visible region and minimizes the amount of light that bounces off. Furthermore, results show that the 0D perovskite improves the extraction of charge carriers, reduces recombination at the interface, and increases the built-in electric potential due to a higher concentration of charge carriers (n). These factors collectively lead to a significant increase in the open-circuit voltage (V oc ). When compared to the bi-layer cell design (3D-CsGeCl 3 /double-Cs 2 InCoCl 6 ), the resulting tri-layer device structure shows better photovoltaic performance. The findings indicate that integrating low-dimensional perovskites can enhance the open-circuit voltage, increasing it to 1.36 V. Additionally, Cs 3 BiBr 6 is identified as a potential material for creating next-generation perovskite solar cells that are both highly efficient and stable. The optimized device architecture, which consists of 50 nm CsGeCl 3 , 200 nm Cs2InCoCl6, and 50 nm Cs 3 BiBr 6 , achieves a champion power conversion efficiency (PCE) of 33.15%.
Authors
- Darko A. Noori
Institutions
- University of Sulaimani (IQ)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-12
- DOI
- https://doi.org/10.21203/rs.3.rs-8689117/v1
- Primary Topic
- Perovskite Materials and Applications
- Type
- preprint
Funders
- University of Sulaimani
- Kerman Neuroscience Research Center, Kerman University of Medical Sciences