A fuzzy multi-criteria reliability assessment framework for flame retardant and dielectric performance of polypropylene cable insulation

Polypropylene (PP) cable insulation is commonly used in today’s electrical systems because of its desirable mechanical strength, chemical resistance, thermal stability, and electrical insulation properties. It is difficult to achieve high flame resistance and high dielectric properties at the same time as a better dielectric property may come at the cost of a poorer flame resistance. This study introduces a Fuzzy Reliability Assessment Framework that is proposed to systematically investigate the performance of PP cable insulation under uncertain and imprecise information. The framework incorporates the most important performance parameters such as UL-94, Limiting Oxygen Index (LOI), dielectric strength, permittivity and dissipation factor into a single composite reliability index which can be compared and ranked easily for insulation alternatives. The methodology involves several steps: identification of the criteria, fuzzification of quantitative and qualitative data, determination of the weights using expert judgement, fuzzy aggregation to fuse the criteria, defuzzification to get crisp reliability scores and sensitivity analysis to evaluate the sensitivity of the weight rankings under ± 10% variations in the weights. A computational study comprising 15 formulations of polypropylene insulation, with different polymer grade and flame retardant additive content, was undertaken. The results show that the composite reliability indices of alternatives with high UL-94 ratings (V-0), high LOI (28–29%), good dielectric strength (24–25 kV/mm) and low values of dissipation factor (0.002) are the highest and the A4, A1 and A13 formulations are the best. The analysis reveals trade-offs between flame retardancy and dielectric properties, and how some formulations exhibit an optimum balance of the two in uncertain conditions. The framework proved to be robust and resilient to moderate changes in the criterion weights through sensitivity analysis, thus supporting its practical application. This study presents one new way to evaluate PP insulation performance quantitatively, interpretable and systematic, which overcomes the defects of traditional deterministic single criterion evaluation. The proposed framework provides a realistic tool for engineers and material designers to optimize an insulation formulation, enabling safe and reliable electrical systems in high voltage, medium voltage and transport. It can also be extended to other polymeric insulators, thus providing a general methodology for performing multi-criteria reliability assessment in electrical engineering.

Authors

Institutions

Publication Details

Journal
Discover Applied Sciences
Published
2026-11-12
DOI
https://doi.org/10.1007/s42452-026-09631-9
Primary Topic
Multi-Criteria Decision Making
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A fuzzy multi-criteria reliability assessment framework for flame retardant and dielectric performance of polypropylene cable insulation

Zhou Yaling
Discover Applied Sciences
Multi-Criteria Decision Making
article

A fuzzy multi-criteria reliability assessment framework for flame retardant and dielectric performance of polypropylene cable insulation

Zhou Yaling
article en

Abstract

Polypropylene (PP) cable insulation is commonly used in today’s electrical systems because of its desirable mechanical strength, chemical resistance, thermal stability, and electrical insulation properties. It is difficult to achieve high flame resistance and high dielectric properties at the same time as a better dielectric property may come at the cost of a poorer flame resistance. This study introduces a Fuzzy Reliability Assessment Framework that is proposed to systematically investigate the performance of PP cable insulation under uncertain and imprecise information. The framework incorporates the most important performance parameters such as UL-94, Limiting Oxygen Index (LOI), dielectric strength, permittivity and dissipation factor into a single composite reliability index which can be compared and ranked easily for insulation alternatives. The methodology involves several steps: identification of the criteria, fuzzification of quantitative and qualitative data, determination of the weights using expert judgement, fuzzy aggregation to fuse the criteria, defuzzification to get crisp reliability scores and sensitivity analysis to evaluate the sensitivity of the weight rankings under ± 10% variations in the weights. A computational study comprising 15 formulations of polypropylene insulation, with different polymer grade and flame retardant additive content, was undertaken. The results show that the composite reliability indices of alternatives with high UL-94 ratings (V-0), high LOI (28–29%), good dielectric strength (24–25 kV/mm) and low values of dissipation factor (0.002) are the highest and the A4, A1 and A13 formulations are the best. The analysis reveals trade-offs between flame retardancy and dielectric properties, and how some formulations exhibit an optimum balance of the two in uncertain conditions. The framework proved to be robust and resilient to moderate changes in the criterion weights through sensitivity analysis, thus supporting its practical application. This study presents one new way to evaluate PP insulation performance quantitatively, interpretable and systematic, which overcomes the defects of traditional deterministic single criterion evaluation. The proposed framework provides a realistic tool for engineers and material designers to optimize an insulation formulation, enabling safe and reliable electrical systems in high voltage, medium voltage and transport. It can also be extended to other polymeric insulators, thus providing a general methodology for performing multi-criteria reliability assessment in electrical engineering.

Discover Applied Sciences
Wuxi Institute of Arts & Technology (CN)
Multi-Criteria Decision Making
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon