Optimization of the Wind Power Plant Operating Mode by the Reactive Power with Consideration of the Inverter Equipment Requirements
When designing distributed generation based on renewable energy sources, along with the general require- ments for power generating facilities, it is necessary to take into account the operating mode of the collector network. This is required to ensure an acceptable voltage level at the inverter buses of individual power units to main- tain the stable operation during voltage surges and dips in the external grid. Otherwise, disturbances in the external grid may lead to the simultaneous disconnection of inverters and the loss of signifi cant generating capacity. Since this requirement must be met across a wide range of possible power system operating conditions, it is important to determine the correspondence between the voltage in the external grid and the voltage at the connection points of individual power units at the collector network design stage. Given that the capacity of distributed generation plants based on renewable sources is steadily increasing, the number of individual power units at a single plant may reach tens or even hundreds. This signifi cantly complicates the instrumental analysis of each unit across a wide range of possible power system conditions. In the article, the authors propose a method to eliminate the need for an individual manual analysis of each power unit. The method is based on an algorithm that uses bal- ance conductance techniques and sensitivity coefficients to improve the observability of the collector network.
Authors
- D Dvorkin
- P Shchipitsin
- M Lipilin
Publication Details
- Journal
- Electric Power Transmission and Distribution
- Published
- 2026-11-12
- DOI
- https://doi.org/10.65209/2218-3116-2026-6-99-12-20
- Primary Topic
- Optimal Power Flow Distribution
- Type
- article
- Field-Weighted Citation Impact
- 0.00