Utilization of scrap in casting process to increase inventory turnover: A case study in a Thai foundry
This research aims to enhance inventory turnover by optimizing the utilization of in-house riser scrap in a Thai foundry manufacturing EN 1.4469 stainless steel casting. The foundry currently faces a challenge with excess riser scrap containing high carbon content, which restricts its reuse in the melting process. To address this issue, a mixture design approach using quadratic regression analysis was applied to develop a predictive model for carbon content based on four charge material components: iron, gate-and-runner scrap, high-carbon riser scrap, and additives. Historical production data from 2022 were analyzed, and the optimal charge composition was identified through response optimization. The resulting model exhibited high predictive accuracy, with an adjusted R2 of 94.20% and a mean absolute percentage error (MAPE) of less than 10%. Implementation of the optimized charge mix increased the average proportion of riser scrap from 3% to 13%, leading to a significant improvement in inventory turnover from 47 to 128 within a two-month period. These findings demonstrate the practical value of integrating statistical modeling into foundry operations to improve material efficiency and reduce production waste.
Authors
- Dr.Somkiat TANGJITSITCHAROEN
- Suchanart NIAMSORN
Institutions
- Chulalongkorn University (TH)
Publication Details
- Journal
- Journal of Metals Materials and Minerals
- Published
- 2026-11-12
- DOI
- https://doi.org/10.55713/jmmm.v37i1.2733
- Primary Topic
- Metallurgical Processes and Thermodynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00