A Bucket-Wheel Excavator for Lunar Polar Mining Sized from Excavation-Energy and Traction Bounds
This paper presents the sizing of a surface system for the Moon, designed around a single operating principle and computed from published material properties of its working environment. The headline results are: regolith production rate of 21,498 kg/h; wheel cutting power of 4,478.654 W; total power of 5,078.654 W. The total mass is 472.8 kg including a twenty percent margin over the component subtotal. Every figure was produced by the accompanying computation script from stated assumptions about density, strength, thermal properties and composition; no figure is asserted without its derivation. Weak points of the design are reported at the same prominence as its strengths, including the conditions under which the chosen principle stops being the right one. This study is a computation, not a measurement: the design is SIMULATED, NOT MEASURED, and no hardware has been built or tested.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24151916
- Citations
- 1
- Primary Topic
- Soil Mechanics and Vehicle Dynamics
- Type
- article
- Field-Weighted Citation Impact
- 1.40