Longitudinal Prediction of WAAM Bead Geometry from 3D Point-Cloud Linear Measurements Using Machine Learning

Wire arc additive manufacturing (WAAM) bead geometry is commonly represented using global descriptors, even though local bead dimensions can vary substantially along the deposition path. This study presents a spatially explicit framework for extracting and predicting longitudinal bead geometry from three-dimensional laser-scanned point clouds. Fifty single bead deposits were produced over a full factorial parameter range of 65–155 A welding current and 20–40 cm/min travel speed. A dedicated point cloud workflow was used to isolate individual beads, establish local substrate references, extract transverse profiles, and calculate bead width, robust height, and cross-sectional area at multiple longitudinal positions. Machine learning models were utilized to model welding current, travel speed, and normalized longitudinal geometric position as predictors. Linear ridge regression, quadratic ridge regression, and Gaussian process regression were evaluated using repeated nested grouped cross-validation, with complete beads retained as independent validation units. The selected framework achieved mean held-out bead R2 values of 0.981 for width, 0.965 for robust height, and 0.985 for cross-sectional area. Pipeline-level holdout evaluation showed that prediction at entirely unseen torch travel speed levels was more difficult than prediction of unseen beads within the sampled process domain, particularly for width and robust height at the domain boundaries. The results demonstrate that WAAM bead geometry can be represented and predicted as a longitudinally varying quantity rather than a single global value, providing a basis for more spatially resolved process planning, geometric simulation, and future adaptive control.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-12
DOI
https://doi.org/10.3390/ma19224809
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Longitudinal Prediction of WAAM Bead Geometry from 3D Point-Cloud Linear Measurements Using Machine Learning

Rok Belšak, Mirko Ficko, Janez Gotlih, Timi Karner et al.
Materials
Additive Manufacturing Materials and Processes
article

Longitudinal Prediction of WAAM Bead Geometry from 3D Point-Cloud Linear Measurements Using Machine Learning

Rok Belšak, Mirko Ficko, Janez Gotlih, Timi Karner, Kristijan Šket
article en

Abstract

Wire arc additive manufacturing (WAAM) bead geometry is commonly represented using global descriptors, even though local bead dimensions can vary substantially along the deposition path. This study presents a spatially explicit framework for extracting and predicting longitudinal bead geometry from three-dimensional laser-scanned point clouds. Fifty single bead deposits were produced over a full factorial parameter range of 65–155 A welding current and 20–40 cm/min travel speed. A dedicated point cloud workflow was used to isolate individual beads, establish local substrate references, extract transverse profiles, and calculate bead width, robust height, and cross-sectional area at multiple longitudinal positions. Machine learning models were utilized to model welding current, travel speed, and normalized longitudinal geometric position as predictors. Linear ridge regression, quadratic ridge regression, and Gaussian process regression were evaluated using repeated nested grouped cross-validation, with complete beads retained as independent validation units. The selected framework achieved mean held-out bead R2 values of 0.981 for width, 0.965 for robust height, and 0.985 for cross-sectional area. Pipeline-level holdout evaluation showed that prediction at entirely unseen torch travel speed levels was more difficult than prediction of unseen beads within the sampled process domain, particularly for width and robust height at the domain boundaries. The results demonstrate that WAAM bead geometry can be represented and predicted as a longitudinally varying quantity rather than a single global value, providing a basis for more spatially resolved process planning, geometric simulation, and future adaptive control.

MaterialsVol. 19(22)
University of Maribor (SI)
Javna Agencija za Raziskovalno Dejavnost RS
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon