BS parametric electrothermal studies
In this deliverable, system simulation is used to evaluate BATSS Battery Thermal Management System (BTMS) in both nominal and abnormal conditions. A step-by-step approach is followed to built the most relevant numerical twin. First a ranking of the most important component of pack to consider in thermal simulation is proposed. Then the selected simulation approach is validated against experimental data on a downscaled configuration. Finally, simulation is used to conduct parametric variations and evaluate complete configuration. Main results are:- Cooling system exchange surface is optimized: no significative benefit of increasing the exchange surface- Proposed BTMS successfully maintain cell temperature in the targeted temperature range- Temperature discrepancy between outer and inner cells of the pack is observed: reduction of the coolant mass flow in outer ribbon is identified as a lever of optimization- In abnormal condition BATSS cooling strategy inhibits cell-to-cell thermal runaway propagation within the pack even in downgraded coolant mass flow condition (0 mass flow condition cannot be assessed in this work)
Authors
- Manex Larranaga (ORCID: https://orcid.org/0000-0002-7372-1082)
- Stéphane Chevillard
Institutions
- IFP Énergies nouvelles (FR)
- Centre for Electrochemical Technologies (ES)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24161231
- Primary Topic
- Battery Modeling and Management
- Type
- article
- Field-Weighted Citation Impact
- 0.00