Investigation on Enhanced Thermal Management of Power Batteries via Staggered-Spaced Bluff-Body Arrangement in Flow Channels

During high-rate discharge, lithium-ion batteries exhibit a notable temperature rise accompanied by an overly large in-module temperature spread, which poses a serious obstacle to thermal management. In this context, a liquid cooling plate equipped with built-in, spaced, staggered bluff bodies is introduced here. The present work examines how four geometric attributes of the bluff body (cross-sectional profile, size, spacing, and wall thickness) influence the heat-removal behavior of the battery module. It is found that the square cross-section yields the best thermo-hydraulic performance. Increasing the bluff body side length, together with reducing both the spacing and the thickness, promotes heat removal while raising the pressure drop to differing degrees. The influence of operating conditions was then analyzed, and the factors considered comprised the coolant type, the inlet temperature, and the inlet mass flow rate. Pure water was identified as the optimum cooling medium among the candidates examined. Lowering the coolant inlet temperature brings the module peak temperature down substantially, yet the maximum temperature difference widens. Conversely, progressively diminishing returns are observed as the inlet flow rate is raised. Subsequently, an orthogonal experiment was run to determine which parameter combination yields a favorable trade-off between thermal and hydraulic behavior, and the optimum was found at a square bluff body side length of 4.0 mm, an inlet mass flow rate of 0.003 kg/s, an inlet temperature of 294.15 K, a bluff body spacing of 12.08 mm, and a bluff body thickness of 0.5 mm. Under these optimal settings, the optimal parameter achieves 299.60 K for the module maximum temperature, 3.55 K for the maximum temperature difference, and 65 Pa for the pressure drop. Compared with the bluff-body-free channel under identical operating conditions, the module maximum temperature and the maximum temperature difference are reduced by 2.26 K and 0.39 K, respectively.

Authors

Institutions

Publication Details

Journal
Batteries
Published
2026-11-12
DOI
https://doi.org/10.3390/batteries12110488
Primary Topic
Battery Modeling and Management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation on Enhanced Thermal Management of Power Batteries via Staggered-Spaced Bluff-Body Arrangement in Flow Channels

Wenjie Qi, Xinjian Wang, Chuan Jin, Shuyu Zhou et al.
Batteries
Battery Modeling and Management
article

Investigation on Enhanced Thermal Management of Power Batteries via Staggered-Spaced Bluff-Body Arrangement in Flow Channels

Wenjie Qi, Xinjian Wang, Chuan Jin, Shuyu Zhou, Ziqiang He, Yang Liu, Ruidi Wang
article en

Abstract

During high-rate discharge, lithium-ion batteries exhibit a notable temperature rise accompanied by an overly large in-module temperature spread, which poses a serious obstacle to thermal management. In this context, a liquid cooling plate equipped with built-in, spaced, staggered bluff bodies is introduced here. The present work examines how four geometric attributes of the bluff body (cross-sectional profile, size, spacing, and wall thickness) influence the heat-removal behavior of the battery module. It is found that the square cross-section yields the best thermo-hydraulic performance. Increasing the bluff body side length, together with reducing both the spacing and the thickness, promotes heat removal while raising the pressure drop to differing degrees. The influence of operating conditions was then analyzed, and the factors considered comprised the coolant type, the inlet temperature, and the inlet mass flow rate. Pure water was identified as the optimum cooling medium among the candidates examined. Lowering the coolant inlet temperature brings the module peak temperature down substantially, yet the maximum temperature difference widens. Conversely, progressively diminishing returns are observed as the inlet flow rate is raised. Subsequently, an orthogonal experiment was run to determine which parameter combination yields a favorable trade-off between thermal and hydraulic behavior, and the optimum was found at a square bluff body side length of 4.0 mm, an inlet mass flow rate of 0.003 kg/s, an inlet temperature of 294.15 K, a bluff body spacing of 12.08 mm, and a bluff body thickness of 0.5 mm. Under these optimal settings, the optimal parameter achieves 299.60 K for the module maximum temperature, 3.55 K for the maximum temperature difference, and 65 Pa for the pressure drop. Compared with the bluff-body-free channel under identical operating conditions, the module maximum temperature and the maximum temperature difference are reduced by 2.26 K and 0.39 K, respectively.

BatteriesVol. 12(11)
Hainan University (CN), Ningde Normal University (CN), Chongqing University of Technology (CN)
Affordable and clean energy
Battery Modeling and Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon