A Diode-Pumped Rubidium Alkali Laser Sized by Pump Absorption and Quantum Defect
This paper presents a computed design for a diode-pumped alkali laser (DPAL) using rubidium vapour buffered with ethane in a centimetre-scale cell. The sizing follows from applying the relevant intensity, thermal, nonlinear and geometric bounds at a single stated operating point, with every number produced by a deposited computation. The headline result is an absorbed pump of 460 W from 500 W incident, a quantum defect of only 1.9% (quantum-limit efficiency 98.1%), an output of 331 W at the stated slope efficiency, and just 27 W deposited as heat in the vapour. The binding constraint is identified explicitly: thermal lensing in the vapour from the residual quantum-defect heat and window contamination by reactive alkali metal. The design is SIMULATED, NOT MEASURED: no hardware was built for this study, and all performance figures are predictions from stated assumptions, offered as a basis for a build decision and a measurement plan.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24155181
- Citations
- 1
- Primary Topic
- Laser Design and Applications
- Type
- article
- Field-Weighted Citation Impact
- 1.32