Holding Back the Drift: The Minimum Pressure-Bump Amplitude That Traps Pebbles, and How Long the Trap Must Hold
Radial drift stops where the pressure gradient vanishes, so a local pressure maximum — a bump — is a trap for pebbles. This paper computes, for a bump at 30 AU in a reference disc, the minimum bump amplitude at which a pressure maximum actually exists, and the retention budget of the trap once it exists. For a bump one scale height wide the critical amplitude is 0.62 of the local pressure; for a bump two scale heights wide it is 2.22 — wide bumps are strikingly inefficient traps, because the restoring gradient of a broad multiplicative pressure bump saturates as its amplitude grows. Below those amplitudes the bump merely slows drift; above them it reverses it. Inside a working trap, a Stokes-0.1 pebble drifts one scale height in 1.04e+03 years but takes 2.64e+04 years to diffuse the same distance, so drift wins over diffusion by a factor of about 25 and the equilibrium pile-up for a 30 per cent bump reaches a formal factor of 1.1e+13, in practice capped by feedback and fragmentation at one to two orders of magnitude. Small grains at Stokes 0.01 concentrate by a factor of just 20.1 — appreciable, but negligible beside the pebble value — and keep leaking through on longer timescales. Traps are therefore size-selective filters with a sharp amplitude threshold — a combination that matches the ringed appearance of millimetre disc images. Computed from stated assumptions, not measured.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24174986
- Primary Topic
- Astrophysics and Star Formation Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00