INVESTIGATION OF JOINT COMPLIANCE IN ROD SYSTEMS OF STEEL STRUCTURES UNDER BENDING
The study analyzes the stress-strain state, equivalent stresses, and angular rotations in steel rod joints under bending to classify hinged, semi-rigid, and rigid connections. Assuming ideal pinning or perfect rigidity causes discrepancies between theoretical models and actual structural behavior. Using the finite element method in ANSYS, this research investigates five typical beam-to-column connections loaded up to yield strength (240 MPa). Results demonstrate that joint stiffness fundamentally controls stress transfer to columns, local deformations, and internal force redistribution. Connections with near-zero angular rotations transferring substantial stresses (60–160 MPa) act as rigid, whereas joints with higher rotations behave as hinged. Angular deformation is proposed as a reliable criterion for semi-rigid behavior, helping engineers optimize structural safety and modeling accuracy.
Authors
- Denys Volchok (ORCID: https://orcid.org/0000-0002-7914-321X)
- Yuliia Vershkova (ORCID: https://orcid.org/0009-0005-2559-7936)
- V.P. Chaban (ORCID: https://orcid.org/0000-0002-0217-5504)
- Віктор Вікторович Рибалка (ORCID: https://orcid.org/0009-0008-6344-5791)
- Vadym Anishchenko (ORCID: https://orcid.org/0009-0009-9639-115X)
Institutions
- Ukrainian State University of Chemical Technology (UA)
- Ukrainian State University of Science and Technologies (UA)
Publication Details
- Journal
- Theory and Building Practice
- Published
- 2026-11-12
- DOI
- https://doi.org/10.23939/jtbp2026.02.037
- Primary Topic
- Structural Load-Bearing Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00