Design Blueprint: A Solar Sintering Paver for Building Lunar Landing Pads Sized from Thermal Diffusion and Layer-Energy Bounds
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24152011): This paper presents the sizing of a surface system for the Moon, designed around a single operating principle and computed from published material properties of its working environment. The headline results are: sintering rate of 0.5 m2/h; advance speed of 1 m/h; thermal energy per square metre of 50.4 MJ/m2. The total mass is 201.6 kg including a twenty percent margin over the component subtotal. Every figure was produced by the accompanying computation script from stated assumptions about density, strength, thermal properties and composition; no figure is asserted without its derivation. Wea Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24152313
- Primary Topic
- Planetary Science and Exploration
- Type
- preprint