Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes

Abstract In this study, biodiesel (AKOME) produced from apricot kernel oil through the transesterification method was blended with diesel fuel in volumetric ratios of 5%, 10%, 15%, and 20% (B5, B10, B15, B20). In a single-cylinder, four-stroke, air-cooled compression ignition (CI) engine, under full load conditions, experiments were conducted at four different engine speeds (1000, 1500, 2000, and 2500 rpm) to measure engine performance parameters (BTE, Torque, Brake Power, BSFC) and exhaust emissions (CO, NO, NOx, HC, EGT). Based on 60 experimental observations (3 repetitions × 4 speeds × 5 blends), the Response Surface Methodology (RSM) models exhibited high prediction accuracy, ranging from R2 = 0.890 (CO) to R2 = 0.976 (BSFC). Sufficient Precision values remained well above the recommended minimum threshold of 4.0 for all response variables (34.98–67.96). The multicriteria optimization conducted using the weighted desirability function (CO × 3, HC × 3, NOx × 2, BTE × 1, BSFC × 1) revealed an optimal blending strategy dependent on engine speed. At 1000 rpm, B20 provided the highest global desirability (D = 0.340), reducing CO by 33.6% and HC by 30.7%, while only increasing BSFC by 4.6%. In the 1500–2000 rpm range, while D100 maintained its marginal superiority, the difference with the closest biodiesel blend remained ΔD < 0.06, indicating practical interchangeability. At high engine speeds of 2500 rpm, D100 was preferred due to the increase in HC caused by the viscosity of biodiesel. B20, across all tested speeds, provided an average CO reduction of 24.1% compared to D100, with the highest reduction measured at 50.1% at 2500 rpm. The obtained results demonstrate that AKOME-diesel mixtures can be directly used in engines without any construction modifications. Additionally, these findings provide a comprehensive biodiesel evaluation framework that enables the development of optimized fuel strategies based on engine operating conditions.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-12
DOI
https://doi.org/10.1021/acsomega.6c04837
Primary Topic
Biodiesel Production and Applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes

Orhan Arpa, İlhan Volkan Öner, Muhammet Kaan Yeşilyurt, Ceyla Güngör et al.
ACS Omega
Biodiesel Production and Applications
article

Performance and Emission Characteristics of Apricot Kernel Oil Methyl Ester–Diesel Blends in a Compression Ignition Engine: RSM-Based Multi-Criteria Optimization across Engine Speed Regimes

Orhan Arpa, İlhan Volkan Öner, Muhammet Kaan Yeşilyurt, Ceyla Güngör, Naime Filiz Tümen Özdi̇l, Melih Utku Abanoz
article en

Abstract

Abstract In this study, biodiesel (AKOME) produced from apricot kernel oil through the transesterification method was blended with diesel fuel in volumetric ratios of 5%, 10%, 15%, and 20% (B5, B10, B15, B20). In a single-cylinder, four-stroke, air-cooled compression ignition (CI) engine, under full load conditions, experiments were conducted at four different engine speeds (1000, 1500, 2000, and 2500 rpm) to measure engine performance parameters (BTE, Torque, Brake Power, BSFC) and exhaust emissions (CO, NO, NOx, HC, EGT). Based on 60 experimental observations (3 repetitions × 4 speeds × 5 blends), the Response Surface Methodology (RSM) models exhibited high prediction accuracy, ranging from R2 = 0.890 (CO) to R2 = 0.976 (BSFC). Sufficient Precision values remained well above the recommended minimum threshold of 4.0 for all response variables (34.98–67.96). The multicriteria optimization conducted using the weighted desirability function (CO × 3, HC × 3, NOx × 2, BTE × 1, BSFC × 1) revealed an optimal blending strategy dependent on engine speed. At 1000 rpm, B20 provided the highest global desirability (D = 0.340), reducing CO by 33.6% and HC by 30.7%, while only increasing BSFC by 4.6%. In the 1500–2000 rpm range, while D100 maintained its marginal superiority, the difference with the closest biodiesel blend remained ΔD < 0.06, indicating practical interchangeability. At high engine speeds of 2500 rpm, D100 was preferred due to the increase in HC caused by the viscosity of biodiesel. B20, across all tested speeds, provided an average CO reduction of 24.1% compared to D100, with the highest reduction measured at 50.1% at 2500 rpm. The obtained results demonstrate that AKOME-diesel mixtures can be directly used in engines without any construction modifications. Additionally, these findings provide a comprehensive biodiesel evaluation framework that enables the development of optimized fuel strategies based on engine operating conditions.

ACS Omega
Dicle University (TR), Adana Science and Technology University (TR), Atatürk University (TR)
Çukurova Üniversitesi, Atatürk Üniversitesi
Affordable and clean energy
Biodiesel Production and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon