Effects of Manganese Oxide Content on the Corrosion Resistance and Cytotoxicity of Chitosan/Manganese Oxide Composite Coatings Sealed on Micro-Arc Oxidized Magnesium Alloy for Guided Bone Regeneration
Magnesium alloys are promising for biodegradable guided bone regeneration (GBR) membrane applications. But a limitation is fast corrosion. Micro-arc oxidation (MAO) coatings on Mg alloys were sealed with chitosan (CS) composite coatings containing varying MnO2 contents (0, 1, 3, 5 g/L; M0–M5). Microstructure, corrosion, wear, and cytocompatibility were evaluated. The results showed that M1 (1 g/L MnO2) exhibited the best corrosion resistance, with the lowest corrosion current density (2.06 μA/cm2) in Hank’s solution, which is six times better than with M0. Adding MnO2 is beneficial because it acts as a sealing agent to fill the micropores of the MAO coating. M1 also showed the least wear volume loss. Cell assays indicated that M1 had the highest relative growth rate (>95%) and alkaline phosphatase activity (~42 U/mg protein). Excessive MnO2 caused agglomeration and reduced performance. Thus, among the tested concentrations, 1 g/L MnO2 optimally enhances corrosion resistance, durability, and early osteogenic differentiation of CS/MAO coatings, demonstrating its promising potential as a base material for future GBR membrane applications.
Authors
- Wenzao Peng (ORCID: https://orcid.org/0009-0003-2268-1740)
- X Chen (ORCID: https://orcid.org/0000-0001-6597-5042)
- Miaomiao Liu (ORCID: https://orcid.org/0000-0002-8399-2134)
- Sutong Yin
- Yuchen Ji
- Jitong Dong
- Junxiu Chen
Institutions
- Changzhou University (CN)
- Nanjing Medical University (CN)
- Nanjing University (CN)
Publication Details
- Journal
- Coatings
- Published
- 2026-11-12
- DOI
- https://doi.org/10.3390/coatings16111347
- Primary Topic
- Magnesium Alloys: Properties and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00