Molecular Anchoring and Multiscale Porosity Synergize in 3D Printed Polyimide Composites for High-Temperature Thermal Management
The large-scale application of energy storage systems such as lithium-ion batteries, which feature high energy density and considerable flammability risks, has created an urgent demand for thermal management materials that offer lightweight construction, high-temperature resistance, efficient insulation, and customizable shaping. Polyimide (PI) is a promising candidate; however, its additive manufacturing is constrained by the high temperatures required for thermal imidization and the severe shrinkage that accompanies this process. To overcome these limitations, herein, an interfacial chemical anchoring strategy is introduced, through which amino-functionalized hollow glass microspheres (HGMs) are covalently integrated into a soluble PI matrix. The achieved composite ink is well-suited for vapor-induced phase separation (VIPS)-assisted direct ink writing (DIW), allowing in situ porosification. The 3D printed constructs thus feature a hierarchical thermal resistance architecture, including macroscopic air gaps from printing, microporous networks derived from phase separation, and hollow HGM cavities, which synergistically suppresses solid conduction, gas convection, and thermal radiation. In addition, the covalently anchored microspheres also serve as crosslinking nodes, enhancing compressive strength. The optimized composites achieve a 35% reduction in density, shrinkage below 5%, a thermal conductivity of 0.048 W·m-1·K-1, and a nearly fourfold improvement in compressive strength. Together, these results demonstrate that the synergy between interfacial chemical anchoring and VIPS-assisted DIW provides a versatile platform for engineering lightweight, high-strength insulation components with tailored geometries for demanding high-temperature applications.
Authors
- Fengxian Gao (ORCID: https://orcid.org/0009-0001-6395-3998)
- Dongrui Wang (ORCID: https://orcid.org/0000-0002-0306-9439)
- Shixiao Wang (ORCID: https://orcid.org/0000-0001-7771-0754)
- Mutian Li (ORCID: https://orcid.org/0000-0002-5808-3860)
- Xiang Lin (ORCID: https://orcid.org/0000-0003-2593-3352)
- Liang Zhang (ORCID: https://orcid.org/0000-0002-2914-9891)
- Min Gong (ORCID: https://orcid.org/0000-0001-7131-0725)
- Tianqi Pang
- Zhiyu Yao
Institutions
- University of Science and Technology Beijing (CN)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-12
- DOI
- https://doi.org/10.1021/acsami.6c16546
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities