Quasar Microlensing Disc Sizes Against a Temperature and Density Profile
This study asks whether microlensing half-light radii agree with the disc profile whose densities are compared with a ceiling. Using published ranges for the relevant source properties and standard relations stated in full, the computation converts the observed quantities into half-light radius in gravitational radii and compares each value with a spin-torsion density ceiling and the shear rate derived from it. The headline values are: r250_1e9_rg = 59.4, r1000_1e9_rg = 377.3, max_rho_ratio = 6.413e-70, rhoA_kg_m3 = 9.718e+57, shear_max_per_s = 4.037e+24, wavelength_scaling_exponent = 0.75. The comparison is a computation from stated assumptions and published inputs, not a measurement, and it is reported at face value: where the converted values fall far from the ceiling, that separation is the result, and where a standard relation is itself placed under strain by the data, that strain is identified separately from any question about the ceiling.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24149917
- Primary Topic
- Astrophysical Phenomena and Observations
- Type
- article
- Field-Weighted Citation Impact
- 0.00