Analytical and simulation-based framework for selecting piezoelectric materials for sensor design

The choice of the correct piezoelectric material is essential for piezoelectric sensors to fulfill the required sensitivity, stability, flexibility, and integration capability. In this work, an analytical and simulation-based framework for comparative evaluation of lead zirconate titanate (PZT), PVDF, Quartz, aluminum nitride (AlN), and ZnO for piezoelectric sensor design is developed. The framework takes into account piezoelectric response, thermal stability, mechanical behavior, and compatibility with fabrication. Analytical models were used to investigate the growth behavior of PZT films and the effect of mechanical stretching and thermal treatment on the β -phase formation of PVDF. Under the assumed model conditions, the PZT model predicts a total film thickness of 750–800 nm for three deposited layers. For PVDF, the calculated β -phase fraction increases from ~0.20 to 0.72 at a stretching ratio of 5×, and values >0.80 are expected at a stretching ratio of ~4 to 5× and processing temperatures of 80 °C–90 °C. The comparative analysis shows PZT possesses the highest d 33 range (300–600 pC/N), PVDF offers high mechanical flexibility, AlN possesses good MEMS compatibility and thermal stability, Quartz has high thermal stability, and ZnO is promising for nanostructured sensor architectures. The results show that there is no single best material and that the selection of materials must be guided by the requirements of the intended application. The proposed framework offers a preliminary analytical basis for the selection of piezoelectric materials and design of sensors. The process-dependent predictions need experimental calibration and validation for specific fabrication systems.

Authors

Institutions

Publication Details

Journal
Journal of Micromanufacturing
Published
2026-11-12
DOI
https://doi.org/10.1177/25165984261498596
Primary Topic
Ferroelectric and Piezoelectric Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Analytical and simulation-based framework for selecting piezoelectric materials for sensor design

Zine Ghemari, Mabrouk Defdaf, Fethi Chouaf, Salah Belkhiri
Journal of Micromanufacturing
Ferroelectric and Piezoelectric Materials
article

Analytical and simulation-based framework for selecting piezoelectric materials for sensor design

Zine Ghemari, Mabrouk Defdaf, Fethi Chouaf, Salah Belkhiri
article en

Abstract

The choice of the correct piezoelectric material is essential for piezoelectric sensors to fulfill the required sensitivity, stability, flexibility, and integration capability. In this work, an analytical and simulation-based framework for comparative evaluation of lead zirconate titanate (PZT), PVDF, Quartz, aluminum nitride (AlN), and ZnO for piezoelectric sensor design is developed. The framework takes into account piezoelectric response, thermal stability, mechanical behavior, and compatibility with fabrication. Analytical models were used to investigate the growth behavior of PZT films and the effect of mechanical stretching and thermal treatment on the β -phase formation of PVDF. Under the assumed model conditions, the PZT model predicts a total film thickness of 750–800 nm for three deposited layers. For PVDF, the calculated β -phase fraction increases from ~0.20 to 0.72 at a stretching ratio of 5×, and values >0.80 are expected at a stretching ratio of ~4 to 5× and processing temperatures of 80 °C–90 °C. The comparative analysis shows PZT possesses the highest d 33 range (300–600 pC/N), PVDF offers high mechanical flexibility, AlN possesses good MEMS compatibility and thermal stability, Quartz has high thermal stability, and ZnO is promising for nanostructured sensor architectures. The results show that there is no single best material and that the selection of materials must be guided by the requirements of the intended application. The proposed framework offers a preliminary analytical basis for the selection of piezoelectric materials and design of sensors. The process-dependent predictions need experimental calibration and validation for specific fabrication systems.

Journal of Micromanufacturing
Mohamed-Cherif Messaadia University (DZ), University Mohamed Boudiaf of M'sila (DZ)
Ferroelectric and Piezoelectric Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon