A Coherent Doppler Wind Lidar Sized by Pulse Energy, Range Resolution and Velocity Precision
This paper presents a computed design for a pulsed coherent Doppler lidar at 1.5 micrometres measuring wind velocity profiles to several kilometres. The sizing follows from applying the relevant intensity, thermal, nonlinear and geometric bounds at a single stated operating point, with every number produced by a deposited computation. The headline result is a range resolution of 30 m from the 200 ns pulse, an average transmitted power of 3.0 W, about 12 detected photons per gate at 3 km under the stated backscatter, a signal-to-noise ratio near 3, and a single-pulse velocity precision near 0.17 m/s before pulse averaging improves it further. The binding constraint is identified explicitly: aerosol-poor air at altitude, where backscatter falls and the maximum useful range contracts sharply. The design is SIMULATED, NOT MEASURED: no hardware was built for this study, and all performance figures are predictions from stated assumptions, offered as a basis for a build decision and a measurement plan.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24155125
- Citations
- 1
- Primary Topic
- Advanced Optical Sensing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 2.38