Hydrological and hydraulic modelling for flood control planning in the Mokwa watershed, Nigeria

Flooding is a recurrent hazard in many data-scarce African watersheds, where limited stream-gauge information constrains event reconstruction and flood-control planning. This study developed an integrated GIS-HEC-HMS-HEC-RAS workflow to characterize the May 2025 flood response of the Mokwa watershed, Niger State, Nigeria. A 30 m SRTM digital elevation model, Esri Sentinel-2 10 m land-cover data, FAO soil information and hourly ERA5 precipitation were used to delineate a 206.6 km² watershed and parameterize three hydrologically connected sub-basins. ERA5 precipitation was extracted from the grid cell containing the watershed centroid and applied uniformly to all sub-basins. HEC-HMS 4.13 employed the SCS Curve Number loss method, SCS Unit Hydrograph transform and lag routing. The baseline simulation produced an outlet peak discharge of 21.8 m³/s on 29 May 2025 at 17:10 and an event runoff depth of 5.36 mm. Sensitivity tests showed that + 10% and + 20% rainfall increased outlet peak discharge to 29.8 and 38.6 m³/s, respectively; changing sub-basin Curve Numbers by -5 and + 5 produced outlet peaks of 11.3 and 34.8 m³/s, while ± 20% changes in basin lag times shifted the peak magnitude to 26.0 and 18.8 m³/s. The routed ReachMO1 hydrograph, with a peak of 20.5 m³/s, was used as the upstream inflow to the HEC-RAS 2D model. The hydraulic simulation produced a maximum water depth of 3.68 m, maximum velocity of 1.95 m/s, and water-surface elevations of approximately 42.08–58.06 m. The maximum inundation envelope covered 11.77 km²; within the 9.85 km² classified depth area, 37.42% was low hazard, 55.03% moderate, 7.35% high and 0.20% very high. Because no observed discharge or flood-stage series were available, the model was not formally calibrated or validated and the results are interpreted as an event-based, sensitivity-tested assessment for an ungauged watershed. The workflow nevertheless provides a reproducible basis for preliminary flood assessment and flood-control planning in data-scarce settings.

Authors

Institutions

Publication Details

Journal
Discover Geoscience
Published
2026-11-12
DOI
https://doi.org/10.1007/s44288-026-00831-9
Primary Topic
Flood Risk Assessment and Management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Hydrological and hydraulic modelling for flood control planning in the Mokwa watershed, Nigeria

Peace Olubukunmi Awoleye, Adedayo Kelvin ADELEKE, Temitope Emmanuel Paul
Discover Geoscience
Flood Risk Assessment and Management
article

Hydrological and hydraulic modelling for flood control planning in the Mokwa watershed, Nigeria

Peace Olubukunmi Awoleye, Adedayo Kelvin ADELEKE, Temitope Emmanuel Paul
article en

Abstract

Flooding is a recurrent hazard in many data-scarce African watersheds, where limited stream-gauge information constrains event reconstruction and flood-control planning. This study developed an integrated GIS-HEC-HMS-HEC-RAS workflow to characterize the May 2025 flood response of the Mokwa watershed, Niger State, Nigeria. A 30 m SRTM digital elevation model, Esri Sentinel-2 10 m land-cover data, FAO soil information and hourly ERA5 precipitation were used to delineate a 206.6 km² watershed and parameterize three hydrologically connected sub-basins. ERA5 precipitation was extracted from the grid cell containing the watershed centroid and applied uniformly to all sub-basins. HEC-HMS 4.13 employed the SCS Curve Number loss method, SCS Unit Hydrograph transform and lag routing. The baseline simulation produced an outlet peak discharge of 21.8 m³/s on 29 May 2025 at 17:10 and an event runoff depth of 5.36 mm. Sensitivity tests showed that + 10% and + 20% rainfall increased outlet peak discharge to 29.8 and 38.6 m³/s, respectively; changing sub-basin Curve Numbers by -5 and + 5 produced outlet peaks of 11.3 and 34.8 m³/s, while ± 20% changes in basin lag times shifted the peak magnitude to 26.0 and 18.8 m³/s. The routed ReachMO1 hydrograph, with a peak of 20.5 m³/s, was used as the upstream inflow to the HEC-RAS 2D model. The hydraulic simulation produced a maximum water depth of 3.68 m, maximum velocity of 1.95 m/s, and water-surface elevations of approximately 42.08–58.06 m. The maximum inundation envelope covered 11.77 km²; within the 9.85 km² classified depth area, 37.42% was low hazard, 55.03% moderate, 7.35% high and 0.20% very high. Because no observed discharge or flood-stage series were available, the model was not formally calibrated or validated and the results are interpreted as an event-based, sensitivity-tested assessment for an ungauged watershed. The workflow nevertheless provides a reproducible basis for preliminary flood assessment and flood-control planning in data-scarce settings.

Discover GeoscienceVol. 4(1)
Federal University of Technology (NG), Adekunle Ajasin University (NG), University of Pretoria (ZA)
Clean water and sanitation
Flood Risk Assessment and Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon