Design and Validation of a Passive Balancer Based on Switched Shunt Resistor for Medium Power Ratings in Electrification Transportation

This article presents the implementation of a passive balancing strategy in an energy storage network based on LiPo cells. The proposed system is intended to operate in a 5.6 kWh battery pack for two-wheeled electric vehicle applications. The battery balancer allows voltage equalization between the LiPo cells before and after the charging process, ensuring controlled charging cycle for each cell. The LiPo cell balancer uses a passive method which transforms the excess of electric energy into heat by means of a resistance described in the Joule Effect. In order to minimize energy losses, three operating modes were proposed: post-charge, pre-charge, and storage node balancing. The post-charge mode reduces the cell voltage to 4.20 V, while the voltage is set to 2.8 V in the pre-charge mode. The design and construction details of a six-cell module prototype are described in this paper, along with experimental research. The balancer system was successfully operated in the series modules of the LiPo battery pack using the proposed modes of operation.

Authors

Institutions

Publication Details

Journal
Electricity
Published
2026-11-12
DOI
https://doi.org/10.3390/electricity7040145
Primary Topic
Battery Modeling and Management
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design and Validation of a Passive Balancer Based on Switched Shunt Resistor for Medium Power Ratings in Electrification Transportation

José Francisco Villegas-Alcaraz, Pedro-Enrique Velázquez-Elizondo, Nancy Mondragón-Escamilla, Samuel Pérez-Rodríguez et al.
Electricity
Battery Modeling and Management
article

Design and Validation of a Passive Balancer Based on Switched Shunt Resistor for Medium Power Ratings in Electrification Transportation

José Francisco Villegas-Alcaraz, Pedro-Enrique Velázquez-Elizondo, Nancy Mondragón-Escamilla, Samuel Pérez-Rodríguez, Ismael Araujo-Vargas, César-David Téllez-Uribe
article en

Abstract

This article presents the implementation of a passive balancing strategy in an energy storage network based on LiPo cells. The proposed system is intended to operate in a 5.6 kWh battery pack for two-wheeled electric vehicle applications. The battery balancer allows voltage equalization between the LiPo cells before and after the charging process, ensuring controlled charging cycle for each cell. The LiPo cell balancer uses a passive method which transforms the excess of electric energy into heat by means of a resistance described in the Joule Effect. In order to minimize energy losses, three operating modes were proposed: post-charge, pre-charge, and storage node balancing. The post-charge mode reduces the cell voltage to 4.20 V, while the voltage is set to 2.8 V in the pre-charge mode. The design and construction details of a six-cell module prototype are described in this paper, along with experimental research. The balancer system was successfully operated in the series modules of the LiPo battery pack using the proposed modes of operation.

ElectricityVol. 7(4)
Instituto Politécnico Nacional (MX)
Affordable and clean energy, Industry, innovation and infrastructure
Battery Modeling and Management
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon