High-Strength Binderless Material from Brewer’s Spent Grain through NaOH Pretreatment
Abstract Brewer’s spent grain (BSG) is a lignocellulosic brewing by-product with other nutrient components. Although BSG-only particleboards have previously been produced by hot pressing, the effects of alkali pretreatment on consolidation and expansion during pressing remain insufficiently characterized. Raw and NaOH-treated BSG were hot-pressed without added adhesives, and specimen-height changes were monitored in situ using a laser displacement sensor. Pressing temperature, duration, and pressure were examined alongside chemical composition, thermal behavior, microstructure, and mechanical properties. Raw BSG showed expansion and loss of integrity at elevated pressing temperatures, whereas NaOH treatment followed by washing enabled stable consolidation at temperatures up to 180°C. Treatment reduced the measured hemicellulose and lignin fractions, while subsequent washing reduced protein and lipid contents. The highest compressive strength reached 71.3 MPa, approximately 32% above the maximum measured for raw BSG. These results identify pretreatment-dependent consolidation behavior as an important factor in processing BSG into high-strength binderless composites.
Authors
- Yang‐Ju Son (ORCID: https://orcid.org/0000-0002-7562-1915)
- Sungwoo Park (ORCID: https://orcid.org/0000-0002-7132-4753)
- Choongwan Koo
- Seongjong Kim
Institutions
- Incheon National University (KR)
- Chung-Ang University (KR)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-12
- DOI
- https://doi.org/10.21203/rs.3.rs-11474280/v1
- Primary Topic
- Natural Fiber Reinforced Composites
- Type
- preprint