A Cryopump Freezer for Acquiring Martian Carbon Dioxide for Propellant Production Sized from Compression and Frost Bounds
This paper presents the sizing of a surface system for Mars, designed around a single operating principle and computed from published material properties of its working environment. The headline results are: carbon dioxide capture of 80 kg/day; refrigeration load of 694.444 W; cryocooler power of 5,787.037 W. The total mass is 82.8 kg including a twenty percent margin over the component subtotal. Every figure was produced by the accompanying computation script from stated assumptions about density, strength, thermal properties and composition; no figure is asserted without its derivation. Weak points of the design are reported at the same prominence as its strengths, including the conditions under which the chosen principle stops being the right one. This study is a computation, not a measurement: the design is SIMULATED, NOT MEASURED, and no hardware has been built or tested.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24152076
- Citations
- 1
- Primary Topic
- Planetary Science and Exploration
- Type
- article
- Field-Weighted Citation Impact
- 2.60