Global dispersion engineering and broadband optimization of disc-loaded waveguides using modal matching and design-space exploration

The development of broadband dispersion systems for disc-loaded waveguides presents an essential requirement for high-power vacuum electronic systems and accelerator systems, yet current methods depend on precise tuning of specific geometric features. The study utilizes a normalized, scale-invariant modal-matching formulation based on cylindrical harmonic expansions and Bloch–Floquet boundary conditions to evaluate global dispersion properties and automatically calculate band-edge boundaries with stable numerical convergence. The calculation, truncation convergence and full-wave validation are demonstrated for both the operating TE 01 mode and the competing higher-order TE 02 mode, with modal-matching/CST agreement better than 1% across the entire passband. The design space of normalized geometric elements shows organized bandwidth distribution patterns which exist because of parametric domains that provide coherent control, not because of individual design settings. The combination of quantitative dispersion flatness metrics with statistical sensitivity analysis demonstrates that the system maintains its structural integrity when faced with geometric changes. Variance-based Sobol indices, reported with bootstrap 95% confidence intervals, identify normalized periodicity as the dominant parameter (total-effect index 0.68 for bandwidth and 0.81 for curvature), while Monte Carlo uncertainty quantification shows that the optimized design retains 95% confidence-interval half-widths below 1.0% across the dispersion band under ± 2% fabrication tolerances; the distinction between output uncertainty (confidence-interval width) and parameter sensitivity (Sobol indices) is explicitly established. Finally, the transverse interaction impedance \({K}_{c}\) is evaluated from the modal fields and shown to remain within ± 8% of its 45 Ω mean value across the 58% passband of the optimized design, compared with ± 25% ripple in non-optimized designs, providing a direct quantitative bridge from the passive dispersion maps to gyro-TWT gain performance. The proposed framework enables engineers to predict and transfer the broadband optimization method to different periodic electromagnetic waveguide structures.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-12
DOI
https://doi.org/10.1038/s41598-026-80445-w
Primary Topic
Gyrotron and Vacuum Electronics Research
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Global dispersion engineering and broadband optimization of disc-loaded waveguides using modal matching and design-space exploration

Fidele Maniraguha, Jitendra Kumar Shukla, Rajiv Kumar Singh
Scientific Reports
Gyrotron and Vacuum Electronics Research
article

Global dispersion engineering and broadband optimization of disc-loaded waveguides using modal matching and design-space exploration

Fidele Maniraguha, Jitendra Kumar Shukla, Rajiv Kumar Singh
article en

Abstract

The development of broadband dispersion systems for disc-loaded waveguides presents an essential requirement for high-power vacuum electronic systems and accelerator systems, yet current methods depend on precise tuning of specific geometric features. The study utilizes a normalized, scale-invariant modal-matching formulation based on cylindrical harmonic expansions and Bloch–Floquet boundary conditions to evaluate global dispersion properties and automatically calculate band-edge boundaries with stable numerical convergence. The calculation, truncation convergence and full-wave validation are demonstrated for both the operating TE 01 mode and the competing higher-order TE 02 mode, with modal-matching/CST agreement better than 1% across the entire passband. The design space of normalized geometric elements shows organized bandwidth distribution patterns which exist because of parametric domains that provide coherent control, not because of individual design settings. The combination of quantitative dispersion flatness metrics with statistical sensitivity analysis demonstrates that the system maintains its structural integrity when faced with geometric changes. Variance-based Sobol indices, reported with bootstrap 95% confidence intervals, identify normalized periodicity as the dominant parameter (total-effect index 0.68 for bandwidth and 0.81 for curvature), while Monte Carlo uncertainty quantification shows that the optimized design retains 95% confidence-interval half-widths below 1.0% across the dispersion band under ± 2% fabrication tolerances; the distinction between output uncertainty (confidence-interval width) and parameter sensitivity (Sobol indices) is explicitly established. Finally, the transverse interaction impedance \({K}_{c}\) is evaluated from the modal fields and shown to remain within ± 8% of its 45 Ω mean value across the 58% passband of the optimized design, compared with ± 25% ripple in non-optimized designs, providing a direct quantitative bridge from the passive dispersion maps to gyro-TWT gain performance. The proposed framework enables engineers to predict and transfer the broadband optimization method to different periodic electromagnetic waveguide structures.

Scientific Reports
Dr. A.P.J. Abdul Kalam Technical University (IN)
Indian Institute of Technology (BHU) Varanasi
Gyrotron and Vacuum Electronics Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon