MODELING OF TECHNOLOGICAL EQUIPMENT FOR THE PURPOSE OF PLATE HEAT EXCHANGERS INTEGRATION INTO THE HYDRAULIC SYSTEM USING THE EXAMPLE OF HEAVY-DUTY VEHICLES
The article considers the thermophysical modeling of cooling processes of working fluids in hydraulic systems of heavy-duty vehicles under intensive, unsteady and cyclic loads. The relevance of the study is determined by the need to maintain a stable temperature regime of hydraulic oil during prolonged operation of machines under difficult road and technologi-cal conditions. The aim of the study is to develop a mathematical model of the heat balance for the hydraulic system of a processing machine and to determine the optimal thermo-hydraulic and design parameters for integrated plate heat exchange equipment. The model ac-counts for heat generation in different systems of automobile, natural heat dissipation from system surfaces, and additional heat removal through the heat exchanger. Reynolds, Prandtl, and Nusselt criteria are used to determine heat transfer, while hydraulic resistance is evaluated using the Darcy-Weisbach relation with consideration of the geometry of interplate channels. Particular attention is paid to the chevron plate profile, for which heat transfer intensity and pressure losses are interrelated with channel geometry and flow regime. A methodology for the information and computational implementation of the model using MS Excel and MathCAD is proposed. Excel is used to form time series, interpolate temperature-dependent thermophysical properties, perform parametric analysis, and construct graphical dependen-cies, while MathCAD is used for numerical investigation of the differential model component, the temperature function in time, and verification of the results. The computational approach provides comparison of operating modes without and with a heat exchanger, analysis of nom-inal, increased, and cyclic loads, and determination of the effect of heat-transfer area on oil temperature and hydraulic losses. It is shown that heat exchanger selection should be per-formed comprehensively, taking into account thermal capacity, heat-transfer area, allowable pressure drops, mass and dimensional limitations, and installation conditions. The structural integration of heat exchange equipment into a process machine is considered as a multi-criteria engineering problem. The proposed approach can be adapted to other hydraulic, ener-gy and chemical-technological systems.
Authors
- Valeriy Klimenko (ORCID: https://orcid.org/0000-0002-7399-0397)
- Ye. Salnikov (ORCID: https://orcid.org/0000-0002-6018-1638)
- Anton Myronov (ORCID: https://orcid.org/0000-0002-4250-6259)
- Mariia Ilchenko (ORCID: https://orcid.org/0000-0002-1353-2108)
Institutions
- Kharkiv National Automobile and Highway University (UA)
- National Technical University "Kharkiv Polytechnic Institute" (UA)
Publication Details
- Journal
- Integrated Technologies and Energy Saving
- Published
- 2026-11-12
- DOI
- https://doi.org/10.20998/2078-5364.2026.3.05
- Primary Topic
- Heat Transfer and Optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00