Outside-In Annular Reconstruction: Determining Inaccessible Concentric Radii from External Overhang Constraints
In standard Euclidean geometry and CAD modeling, concentric circular structures and conicalfrustums are defined inside-out: starting from a known central origin X, an inner radius r,and an outer radius R, from which the radial step or overhang w = R − r is trivially derived.However, in real-world reverse engineering and physical metrology, the center X is frequentlyinaccessible—occluded inside solid material and obstructed by mounted structures. This paperinvestigates a deceptively simple daily-life problem: reconstructing the inner radius (r = X-Y ),outer radius (R = X-Z), and bounding box dimensions (S) of a load-bearing conical frustum(an installed furniture leg) when only the external radial overhang (w = Z-Y ) is directlymeasurable. We demonstrate why the purely radial 1D formulation creates an algebraicallyunderdetermined system regardless of rotational translation, and we introduce two classes ofsolutions: (1) Geometric Triangulation Formulations that pit linear overhang against 2Dcircular curvature (via bounding-square corner offsets and tangent sightlines), and (2) CanonicalUniversal Equations governed by harmonic, Golden (φ), and Silver (δS) ratio constantsthat close the system under self-similar and equal-area constraints.
Authors
- Michele Fella
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-12
- DOI
- https://doi.org/10.5281/zenodo.24166140
- Primary Topic
- Mathematics and Applications
- Type
- preprint