Development of an in-situ type magnetorheological honing tool for single-setup precision finishing of internal cylindrical surfaces
Fine finishing of internal cylindrical surfaces requires advanced honing after conventional honing to achieve the desired surface finish. Although conventional honing removes initial surface irregularities, it cannot produce the ultra-fine surface finishes required for high-performance applications. Moreover, separate finishing setups increase processing time and alignment errors. To overcome these limitations, a spline shaft gear mechanism integrated tool combining conventional honing and advanced magnetorheological honing (MRH) was recently developed. However, its bulky construction and minimum finishing diameter of 96 mm limit its application to larger cylindrical components. Therefore, the present work proposes a novel in situ type MRH tool integrating conventional honing and advanced MRH within a single setup under a unified motion control system. The proposed tool incorporates a compact link-joint-based uniform expansion mechanism that adapts to internal cylindrical diameters ranging from 55 to 96 mm. An integrated bevel gear-based tool-holding fixture enables smooth switching between conventional honing and advanced MRH without workpiece repositioning. Finite element and dynamic analyses validated the tool design. Experimental results reduced the surface roughness of an EN-31 cylindrical workpiece from 6.12 μm to 0.047 μm. The proposed tool eliminates multiple setups, improves productivity and offers an industrially viable solution for precision finishing of internal cylindrical components.
Authors
- Anant Kumar Singh (ORCID: https://orcid.org/0000-0002-0080-3730)
- Shubham Khatri (ORCID: https://orcid.org/0000-0003-3926-2246)
- Pankaj Kumar
Institutions
- Thapar Institute of Engineering & Technology (IN)
Publication Details
- Journal
- Machining Science and Technology
- Published
- 2026-11-12
- DOI
- https://doi.org/10.1080/10910344.2026.2746390
- Primary Topic
- Advanced Surface Polishing Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00