Vertical Cutoff Walls with Novel Alkali-Activated Slag–Fly Ash Backfills: Hydraulic and Mechanical Behavior

Abstract Vertical cutoff walls are widely used as in situ barriers for the containment of contaminated water migration in the subsurface and groundwater. Conventional materials, such as soil–bentonite and soil–cement–bentonite backfill, exhibit the inherent swelling and shrinkage behavior of bentonite, as well as low strength and chemical incompatibility. These characteristics can lead to the development of preferential flow paths, which in turn can reduce long-term containment performance. Hence, in the present study, a novel alkali-activated slag–fly ash (AASF) backfill material was developed for application in the vertical cutoff walls. The workability, hydraulic conductivity, and unconfined compressive strength (UCS) tests of various mixes were evaluated to determine the optimum mix proportions. Further, the hydration products and microstructural development were characterized to elucidate the reaction mechanism underlying the hydraulic and mechanical properties. From the results, the optimum mix proportion is identified to be a mix of 1 ∶ 2 fly ash to ground granulated blast-furnace slag (GGBS) with an alkali activator dosage of M1.6N8, having the lowest hydraulic conductivity of 1.3 × 10 − 10 m / s . For a fly ash–to-GGBS ratio of 1 ∶ 2 , with increasing the activator dosage from M1.2N4 to M1.6N8, the hydraulic conductivity is decreased from 1.24 × 10 − 8 to 1.3 × 10 − 10 m / s , and UCS is increased from 10.31 to 28.5 MPa. The highest unconfined compressive strength of 33.28 MPa was observed for the binder with only GGBS and an alkali activator dosage of M1.6N8 at 28 days. From microstructural characterization, a binder ratio of fly ash to GGBS of 1 ∶ 2 , with a modulus of 1.6 and an 8% Na 2 O content, has resulted in the formation of an aluminosilicate gel, which contributes to reduced pore structure and enhanced matric densification.

Authors

Institutions

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-12
DOI
https://doi.org/10.1061/jmcee7.mteng-24480
Primary Topic
Concrete and Cement Materials Research
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Vertical Cutoff Walls with Novel Alkali-Activated Slag–Fly Ash Backfills: Hydraulic and Mechanical Behavior

Chandra Bhanu Gupt, Bande Giridhar Rajesh, R. Mahender Reddy
Journal of Materials in Civil Engineering
Concrete and Cement Materials Research
article

Vertical Cutoff Walls with Novel Alkali-Activated Slag–Fly Ash Backfills: Hydraulic and Mechanical Behavior

Chandra Bhanu Gupt, Bande Giridhar Rajesh, R. Mahender Reddy
article en

Abstract

Abstract Vertical cutoff walls are widely used as in situ barriers for the containment of contaminated water migration in the subsurface and groundwater. Conventional materials, such as soil–bentonite and soil–cement–bentonite backfill, exhibit the inherent swelling and shrinkage behavior of bentonite, as well as low strength and chemical incompatibility. These characteristics can lead to the development of preferential flow paths, which in turn can reduce long-term containment performance. Hence, in the present study, a novel alkali-activated slag–fly ash (AASF) backfill material was developed for application in the vertical cutoff walls. The workability, hydraulic conductivity, and unconfined compressive strength (UCS) tests of various mixes were evaluated to determine the optimum mix proportions. Further, the hydration products and microstructural development were characterized to elucidate the reaction mechanism underlying the hydraulic and mechanical properties. From the results, the optimum mix proportion is identified to be a mix of 1 ∶ 2 fly ash to ground granulated blast-furnace slag (GGBS) with an alkali activator dosage of M1.6N8, having the lowest hydraulic conductivity of 1.3 × 10 − 10 m / s . For a fly ash–to-GGBS ratio of 1 ∶ 2 , with increasing the activator dosage from M1.2N4 to M1.6N8, the hydraulic conductivity is decreased from 1.24 × 10 − 8 to 1.3 × 10 − 10 m / s , and UCS is increased from 10.31 to 28.5 MPa. The highest unconfined compressive strength of 33.28 MPa was observed for the binder with only GGBS and an alkali activator dosage of M1.6N8 at 28 days. From microstructural characterization, a binder ratio of fly ash to GGBS of 1 ∶ 2 , with a modulus of 1.6 and an 8% Na 2 O content, has resulted in the formation of an aluminosilicate gel, which contributes to reduced pore structure and enhanced matric densification.

Journal of Materials in Civil EngineeringVol. 39(3)
Indian Institute of Technology Dharwad (IN)
Responsible consumption and production
Concrete and Cement Materials Research
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon