Load-following control based on extended point kinetic model for VVER-1200 reactor

Abstract This study presents an extended control-oriented framework for load-following operation of a VVER-1200 reactor, incorporating cladding temperature as an explicit dynamic state within a coupled neutronic–thermal model. The proposed formulation enhances conventional point kinetics approaches by enabling direct monitoring of the fuel–cladding–coolant thermal interactions, thereby improving the physical resolution of reactor transient behavior. The system is evaluated under three progressively demanding load-following power ramps (0.1%/s, 0.2%/s, and 0.25%/s). A state observer is employed to reconstruct unmeasured states, enabling implementation of an LQR-based full-state feedback controller without requiring complete direct measurement of all internal variables. The closed-loop performance is assessed in terms of power tracking, thermal response, and control rod dynamics. The model is verified against the nonlinear six-group point-kinetics formulation, VVER-1200 design data and published steady-state core thermal-hydraulic results, and it is compared quantitatively with the conventional two-node formulation. A sensitivity analysis further quantifies the effects of uncertainties in gap conductance, reactivity coefficients and control-rod worth and of the control-rod speed limit. Simulation results demonstrate stable and consistent performance across all scenarios, with maximum power overshoot reaching 8.9% under the most aggressive transient. Corresponding fuel temperature deviations reach 5.49%, while cladding temperature deviations are captured explicitly with peak values of 0.0086%, 0.16%, and 1.19% across the three ramps. The control rod drive system remains within its physical limit of 2 cm/s, although saturation is observed under high ramp rates, indicating actuator-limited operation during severe transients. The results confirm strong coupling between neutronic power and thermal response, while highlighting the importance of explicitly modeling cladding dynamics for improved assessment of thermal margins. The proposed framework provides a more detailed and physically consistent representation of reactor behavior under load-following conditions, supporting enhanced safety-oriented analysis and operational flexibility in pressurized water reactors.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-12
DOI
https://doi.org/10.1038/s41598-026-75093-z
Primary Topic
Nuclear reactor physics and engineering
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Load-following control based on extended point kinetic model for VVER-1200 reactor

Magdy Raouf Roman, Hesham Elkhatib, Ahmed E. Salman
Scientific Reports
Nuclear reactor physics and engineering
article

Load-following control based on extended point kinetic model for VVER-1200 reactor

Magdy Raouf Roman, Hesham Elkhatib, Ahmed E. Salman
article en

Abstract

Abstract This study presents an extended control-oriented framework for load-following operation of a VVER-1200 reactor, incorporating cladding temperature as an explicit dynamic state within a coupled neutronic–thermal model. The proposed formulation enhances conventional point kinetics approaches by enabling direct monitoring of the fuel–cladding–coolant thermal interactions, thereby improving the physical resolution of reactor transient behavior. The system is evaluated under three progressively demanding load-following power ramps (0.1%/s, 0.2%/s, and 0.25%/s). A state observer is employed to reconstruct unmeasured states, enabling implementation of an LQR-based full-state feedback controller without requiring complete direct measurement of all internal variables. The closed-loop performance is assessed in terms of power tracking, thermal response, and control rod dynamics. The model is verified against the nonlinear six-group point-kinetics formulation, VVER-1200 design data and published steady-state core thermal-hydraulic results, and it is compared quantitatively with the conventional two-node formulation. A sensitivity analysis further quantifies the effects of uncertainties in gap conductance, reactivity coefficients and control-rod worth and of the control-rod speed limit. Simulation results demonstrate stable and consistent performance across all scenarios, with maximum power overshoot reaching 8.9% under the most aggressive transient. Corresponding fuel temperature deviations reach 5.49%, while cladding temperature deviations are captured explicitly with peak values of 0.0086%, 0.16%, and 1.19% across the three ramps. The control rod drive system remains within its physical limit of 2 cm/s, although saturation is observed under high ramp rates, indicating actuator-limited operation during severe transients. The results confirm strong coupling between neutronic power and thermal response, while highlighting the importance of explicitly modeling cladding dynamics for improved assessment of thermal margins. The proposed framework provides a more detailed and physically consistent representation of reactor behavior under load-following conditions, supporting enhanced safety-oriented analysis and operational flexibility in pressurized water reactors.

Scientific ReportsVol. 16(1)
Egyptian Atomic Energy Authority (EG), Helwan University (EG)
Science and Technology Development Fund
Affordable and clean energy
Nuclear reactor physics and engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon