A slope-adaptive hybrid spline framework for global maximum power point tracking in partially shaded photovoltaic systems

Partial shading can produce multimodal power–voltage ( P – V ) characteristics and cause conventional maximum power point tracking (MPPT) methods to converge to a local maximum. This paper proposes a slope-adaptive hybrid spline (S-AHS) framework that switches between linear and cubic interpolation according to local slope variation and combines the reconstructed P – V curve with a coarse-to-local global search. The revised validation clearly separates measured and simulated information: the uniform-irradiance P – V comparison uses the experimental curve available from the El Jadida photovoltaic station, whereas the dynamic time-series test is a simulated, experimentally informed benchmark rather than a direct hardware experiment. In the original time-series benchmark, S-AHS gives NMSE = 0.0007, R = 0.9935, and FB = 0.0012. To directly test the global-MPPT claim, four additional datasheet-calibrated partial-shading patterns with bypass-diode activation were introduced. They produce three local maxima per P – V curve. With 51 sampled points and α = 1, S-AHS identifies the global peak with tracking efficiencies between 99.78% and 99.98% and a worst-case peak-power error of 0.22%. A sensitivity study over α ∈ [0.5, 1.5] shows a mean peak-power error of about 0.11%, while the mean fraction of intervals treated cubically decreases from 24.5% to 5.5%. In 50 noisy repetitions with a power-noise standard deviation equal to 0.5% of the true GMPP, S-AHS retains mean tracking efficiencies from 99.74% to 99.90% across the tested PSC cases. These results support S-AHS as a computationally economical interpolation-based GMPPT strategy while also clarifying the present study’s limitation: the new broad PSC tests are controlled numerical benchmarks and do not replace multi-technology hardware validation.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy
Published
2026-11-12
DOI
https://doi.org/10.1177/09576509261506732
Primary Topic
Photovoltaic System Optimization Techniques
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

A slope-adaptive hybrid spline framework for global maximum power point tracking in partially shaded photovoltaic systems

Abbes Kadyri, Otmane Souhar, Khalid Kandoussi
Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy
Photovoltaic System Optimization Techniques
article

A slope-adaptive hybrid spline framework for global maximum power point tracking in partially shaded photovoltaic systems

Abbes Kadyri, Otmane Souhar, Khalid Kandoussi
article en

Abstract

Partial shading can produce multimodal power–voltage ( P – V ) characteristics and cause conventional maximum power point tracking (MPPT) methods to converge to a local maximum. This paper proposes a slope-adaptive hybrid spline (S-AHS) framework that switches between linear and cubic interpolation according to local slope variation and combines the reconstructed P – V curve with a coarse-to-local global search. The revised validation clearly separates measured and simulated information: the uniform-irradiance P – V comparison uses the experimental curve available from the El Jadida photovoltaic station, whereas the dynamic time-series test is a simulated, experimentally informed benchmark rather than a direct hardware experiment. In the original time-series benchmark, S-AHS gives NMSE = 0.0007, R = 0.9935, and FB = 0.0012. To directly test the global-MPPT claim, four additional datasheet-calibrated partial-shading patterns with bypass-diode activation were introduced. They produce three local maxima per P – V curve. With 51 sampled points and α = 1, S-AHS identifies the global peak with tracking efficiencies between 99.78% and 99.98% and a worst-case peak-power error of 0.22%. A sensitivity study over α ∈ [0.5, 1.5] shows a mean peak-power error of about 0.11%, while the mean fraction of intervals treated cubically decreases from 24.5% to 5.5%. In 50 noisy repetitions with a power-noise standard deviation equal to 0.5% of the true GMPP, S-AHS retains mean tracking efficiencies from 99.74% to 99.90% across the tested PSC cases. These results support S-AHS as a computationally economical interpolation-based GMPPT strategy while also clarifying the present study’s limitation: the new broad PSC tests are controlled numerical benchmarks and do not replace multi-technology hardware validation.

Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy
Chouaib Doukkali University (MA)
Affordable and clean energy
Photovoltaic System Optimization Techniques
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon