Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing

Structure-induced cavitation occurs at the oil groove–oil hole intersection of main bearings in high-performance diesel engines. Large eddy simulation combined with a multiphase cavitation model was used to investigate the effects of oil-hole fillet radius, chamfer angle, oil-groove depth, and groove-end profile. Cavitation volume fraction, cavitation extent ratio, and their time integrals were evaluated separately on the bearing-shell and journal sides. Compared with the 3 mm fillet baseline, a 5 mm fillet reduced the integrated cavitation volume fraction by 66.26% on the bearing-shell side and 22.62% on the journal side. A 30° chamfer also reduced both integrated indices relative to the baseline, whereas increasing the chamfer angle shifted cavitation clouds toward the bearing-shell wall. Increasing groove depth intensified cavitation on both sides. Tangent Bézier profiles reduced peak velocity and weakened incipient cavitation, but promoted wall-attached jets and prolonged cavitation, increasing the time-integrated indices. These results show that local geometry affects the responses on the two sides through changes in jet direction, cavitation migration, and duration, providing design guidance for controlling cavitation in diesel-engine main bearings.

Authors

Institutions

Publication Details

Journal
Lubricants
Published
2026-11-12
DOI
https://doi.org/10.3390/lubricants14110430
Primary Topic
Tribology and Lubrication Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing

Jingbin Liu, Zhifei Dang, Zhenming Liu, Li Mei et al.
Lubricants
Tribology and Lubrication Engineering
article

Investigation of Structure-Induced Cavitation at the Oil-Groove–Oil-Hole Intersection of a Diesel Engine Main Bearing

Jingbin Liu, Zhifei Dang, Zhenming Liu, Li Mei, Tianyi Yu, Liting Li, Yabing Xu, Haonan Wei
article en

Abstract

Structure-induced cavitation occurs at the oil groove–oil hole intersection of main bearings in high-performance diesel engines. Large eddy simulation combined with a multiphase cavitation model was used to investigate the effects of oil-hole fillet radius, chamfer angle, oil-groove depth, and groove-end profile. Cavitation volume fraction, cavitation extent ratio, and their time integrals were evaluated separately on the bearing-shell and journal sides. Compared with the 3 mm fillet baseline, a 5 mm fillet reduced the integrated cavitation volume fraction by 66.26% on the bearing-shell side and 22.62% on the journal side. A 30° chamfer also reduced both integrated indices relative to the baseline, whereas increasing the chamfer angle shifted cavitation clouds toward the bearing-shell wall. Increasing groove depth intensified cavitation on both sides. Tangent Bézier profiles reduced peak velocity and weakened incipient cavitation, but promoted wall-attached jets and prolonged cavitation, increasing the time-integrated indices. These results show that local geometry affects the responses on the two sides through changes in jet direction, cavitation migration, and duration, providing design guidance for controlling cavitation in diesel-engine main bearings.

LubricantsVol. 14(11)
Naval University of Engineering (CN)
Tribology and Lubrication Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon