Effects of water content on the mechanical properties of rock and structural planes and slope stability: a case study of a highway rock slope

Abstract To investigate the influence mechanism of water on rock slope stability under different water-content conditions, a high rock slope along a section of the Chongqing–Guizhou Expressway was selected as the engineering case. Initially, field samples were collected and sandstone specimens with varying water content were prepared. Uniaxial compression tests and shear property tests were conducted on natural structural planes within the rock mass to investigate the impact of water on both rock mass specimens and structural planes, while also deeply analyzing the mechanism by which water influences slope instability. Moreover, the slope excavation process under natural and saturated states was analyzed using the 3D-σ three-dimensional finite element numerical simulation software. Herein the stress and displacement variations of the slope during and after excavation were calculated and discussed for different water content states. The results of both physical experiments and numerical calculations demonstrated that: (1) In comparison to the natural state, there was a 23.88% decrease in compressive strength, a 12.34% decrease in elastic modulus, as well as a 21.2% increase in Poisson’s ratio. (2) The deformation of rock mass increases with a higher water content, while its shear strength decreases accordingly. When the rock masses reach a saturated state, there was an observed reduction in shear strength by 11.17%, cohesion decreases by 16.09%, and internal friction angle decreases by 10.02%. (3) The numerical simulation results showed that deformation and stress concentration were closely associated with the weak interlayer, while water saturation amplified the instability response by degrading the mechanical parameters of the slope materials. Compared with the natural condition, the saturated slope exhibited markedly greater shear stress and horizontal displacement during staged excavation. These findings provide a case-based reference for evaluating water-induced stability degradation of sandstone–mudstone interbedded highway rock slopes under comparable geological and hydrological conditions.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-12
DOI
https://doi.org/10.1038/s41598-026-78111-2
Primary Topic
Geotechnical Engineering and Analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effects of water content on the mechanical properties of rock and structural planes and slope stability: a case study of a highway rock slope

Zhiwei Ni, Canming Yuan, Qihang Li, Minghua Luo et al.
Scientific Reports
Geotechnical Engineering and Analysis
article

Effects of water content on the mechanical properties of rock and structural planes and slope stability: a case study of a highway rock slope

Zhiwei Ni, Canming Yuan, Qihang Li, Minghua Luo, Rui Ma
article en

Abstract

Abstract To investigate the influence mechanism of water on rock slope stability under different water-content conditions, a high rock slope along a section of the Chongqing–Guizhou Expressway was selected as the engineering case. Initially, field samples were collected and sandstone specimens with varying water content were prepared. Uniaxial compression tests and shear property tests were conducted on natural structural planes within the rock mass to investigate the impact of water on both rock mass specimens and structural planes, while also deeply analyzing the mechanism by which water influences slope instability. Moreover, the slope excavation process under natural and saturated states was analyzed using the 3D-σ three-dimensional finite element numerical simulation software. Herein the stress and displacement variations of the slope during and after excavation were calculated and discussed for different water content states. The results of both physical experiments and numerical calculations demonstrated that: (1) In comparison to the natural state, there was a 23.88% decrease in compressive strength, a 12.34% decrease in elastic modulus, as well as a 21.2% increase in Poisson’s ratio. (2) The deformation of rock mass increases with a higher water content, while its shear strength decreases accordingly. When the rock masses reach a saturated state, there was an observed reduction in shear strength by 11.17%, cohesion decreases by 16.09%, and internal friction angle decreases by 10.02%. (3) The numerical simulation results showed that deformation and stress concentration were closely associated with the weak interlayer, while water saturation amplified the instability response by degrading the mechanical parameters of the slope materials. Compared with the natural condition, the saturated slope exhibited markedly greater shear stress and horizontal displacement during staged excavation. These findings provide a case-based reference for evaluating water-induced stability degradation of sandstone–mudstone interbedded highway rock slopes under comparable geological and hydrological conditions.

Scientific Reports
Chongqing University (CN), Shandong University of Science and Technology (CN)
National Science and Technology Major Project
Geotechnical Engineering and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon